ASTM C1490-14(2023) PDF
Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 8
- Дата публикации:
- 1 января 2023 г.
- Издание:
- C1490
- ICS:
- 03.100.30
SIGNIFICANCE AND USE 4.1 The process of selection, training and qualification of personnel involved with NDA measurements is one of the quality assurance elements for an overall quality NDA measurement program. 4.2 This guide describes an approach to selection, qualification, and training of personnel that is to be used in conjunction with other NDA Quality Assurance (QA) program elements. The selection, qualification and training processes can vary and this guide provides one such approach. 4.3 The qualification activities described in this guide assume that NDA personnel are already proficient in general facility operations and safety procedures. The training and activities that developed this proficiency are not covered in this guide. 4.4 This guide describes a basic approach and principles for the qualification of NDA professionals and technical specialists and operators. A different approach may be adopted by the management organization based on its particular organization and facility specifics. However, if a variation of the approach of this guide is applied, the resulting selection, training, and qualification programs must meet the requirements of the facility quality assurance program and should provide all the applicable functions of Section 5. 4.5 This guide may be used as an aid in the preparation of a Training Implementation Plan (TIP) for the Transuranic Waste Characterization Program (TWCP). 4.6 This guide describes education and expertise guidance for NDA auditors due to the importance and complexity of proper oversight of NDA activities. SCOPE 1.1 This guide contains good practices for the selection, training, qualification, and professional development of personnel performing analysis, calibration, physical measurements, or data review using nondestructive assay equipment, methods, results, or techniques. The guide also covers NDA personnel involved with NDA equipment setup, selection, diagnosis, troubleshooting, or repair. General guidelines for the selection, training, and qualification of NDA auditors are included as well, but at a lower level of detail due to the variability of the personnel’s responsibilities performing this functions. Selection, training, and qualification programs based on this guide are intended to provide assurance that NDA personnel are suitably qualified and experienced personnel (SQEP) to perform their jobs competently. This guide presents a series of options but does not recommend a specific course of action. This standard guide does not address the qualifications per se of an NDA Manager. However, it is expected that the NDA Manager is familiar with NDA techniques, and can make informed decisions on the acceptability of the assay results. If an NDA Manager does not have adequate technical qualifications in the NDA field, they are recommended to undergo training to gain familiarity in this area. An NDA Manager with no relevant NDA experience should have access to a Senior NDA Professional who will give guidance for all technical decisions such as applicability and limitation of methods, reasonableness of results, needed upgrades and advantageous development investments. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Abstract
Overview
ASTM C1490-14(2023): Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel provides a framework for organizations to systematically select, train, and qualify personnel involved in nondestructive assay (NDA) activities. NDA refers to analysis, calibration, physical measurements, and data review without altering the material being examined, primarily in the context of nuclear facilities. The standard supports quality assurance (QA) goals, helping ensure personnel performing NDA tasks are suitably qualified, competent, and meet regulatory requirements.
The guide addresses a broad range of NDA roles, from instrument operators and technical specialists to senior professionals and auditors. It emphasizes the importance of matching competence with responsibility, and suggests ways to structure training and qualification to suit unique facility needs. While it provides a recommended approach, the standard does not prescribe a single method, offering instead a flexible set of best practices.
Key Topics
- Personnel Selection: The guide highlights the careful evaluation of candidates’ education, experience, and suitability for NDA duties. Attributes such as technical skills, judgment, motivation, and communication ability are critical. Selection may involve interviews and practical tests.
- Training Programs: Training should combine classroom, laboratory, and on-the-job instruction. Core topics cover nuclear theory, instrument operation and calibration, NDA methods (e.g., gamma-ray, neutron counting), data analysis, regulatory requirements, and facility-specific processes.
- Qualification Process: Personnel must demonstrate competence through education, experience, and practical skills. Qualification is documented and auditable, ensuring a verifiable record of an individual’s ability and ongoing training requirements.
- Roles and Responsibilities: The guide outlines expectations and required knowledge for various NDA personnel categories, including:
- Senior NDA Professionals
- NDA Professionals
- Technical Specialists
- Qualified Instrument Operators
- NDA Auditors
- Professional Development: Ongoing training, mentoring, and participation in external courses or conferences are encouraged for continuous improvement in NDA skills.
Applications
Organizations implementing NDA techniques-particularly in nuclear material control, radioactive waste management, and safeguards-benefit from applying ASTM C1490-14(2023) by:
- Enhancing Quality Assurance: Structured training and qualification support reliable NDA measurements, calibration, and data analysis, reducing errors and ensuring regulatory compliance.
- Supporting Nuclear Facility Operations: With trained and qualified staff, facilities can maintain higher safety standards in handling special nuclear materials, complying with both internal policies and external regulations.
- Developing Customized Training Programs: Facilities can use this guide to create training implementation plans tailored to their specific equipment, processes, and regulatory landscape.
- Enabling Effective Oversight: By outlining auditor qualifications, the standard supports thorough and knowledgeable oversight of NDA activities, promoting accountability and continual improvement.
Related Standards
ASTM C1490-14(2023) references and aligns with several other ASTM standards relevant to nondestructive assay, including:
- ASTM C1030: Determination of plutonium isotopic composition by gamma-ray spectrometry
- ASTM C1133: NDA of special nuclear material in low-density scrap and waste by segmented passive gamma-ray scanning
- ASTM C1207, C1221, C1268, C1316, C1455, C1458, C1493, C1500, C1514, C1592, C1718, C1726: Various NDA methods for assay of nuclear materials and quality assurance practices
- ASTM C1673: Terminology for nondestructive assay methods
These related standards provide specific methods and terminology that complement the personnel qualification and training guidelines in C1490-14(2023).
Keywords: ASTM C1490-14(2023), nondestructive assay, NDA personnel, training, qualification, quality assurance, nuclear facility, NDA auditor, nuclear measurement, professional development, calibration, quality NDA measurement program.
Технические детали
- Технический комитет
- C26 - Nuclear Fuel Cycle
- SKU
- ASTM C1490-14(2023)
Похожие стандарты
Другие стандарты ASTM
ASTM-TPT-47
Phase I & Phase II Environmental Site Assessment Processes
Phase I & Phase II Environmental Site Assessment Processes
ASTM-TPT-8
Phase I Environmental Site Assessment Practices For Commercial Real Estate: Phase I Site Assessment & Transac…
ASTM-TPT-1137
ASTM D975 Standard Specification for Diesel Fuel
ASTM D975 Standard Specification for Diesel Fuel
ASTM-TPT-1202
ASTM D8421 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Ma…
ASTM D8421 Standard Test Method -- eLearning Course
ASTM-TPT-691
Microaprendizagem para D4057: Amostragem de ponto (PT)
D4057 Microlearning: Spot Sampling Portuguese
ASTM-TPT-1091
Metodo de prueba estandar D4052 de ASTM -- Curso de aprendizaje electrónico (ES)
Modulo eLearning para ASTM D4052 en espanol
ASTM ACEM20180086
Using Neutron Radiography to Quantify the Settlement of Fresh Concrete
Specifications have been implemented for concrete bridge decks in North America that restrict the use of higher slump concrete mixtures primarily because of concerns about differential settlement and…
ASTM ACEM20180041
Experimental Study of Competing Failure of Reinforced Concrete Based on the Weibull Distribution
To predict the failure lifetime of reinforced concrete, a current accelerating corrosion test was performed on concrete by simulating the environment in an area with saline soil. To study the concret…