Standard Test Methods for Strength of Anchors in Masonry
Standard Test Methods for Strength of Anchors in Masonry
SIGNIFICANCE AND USE 4.1 These test methods are intended to provide reproducible data from which acceptance criteria, design data, and specifications can be developed for anchors intended to be installed in masonry assemblies. SCOPE 1.1 These test methods address the tensile and shear strengths of post-installed and placed-during-construction anchors in masonry test specimens made of masonry assemblies. Environmental exposures include freezing and thawing, moisture, decreased and elevated temperatures and corrosion. These test methods provide basic testing procedures for use with product-specific evaluation and acceptance standards and are intended to be performed in a testing laboratory. Product-specific evaluation and acceptance standards may add specific details and appropriate parameters as needed to accomplish the testing. Only those tests required by the specifying authority need to be performed. 1.2 Loadings include quasi-static, dynamic, fatigue and shock. Environmental exposures include freezing and thawing, moisture, decreased and elevated temperatures and corrosion. 1.3 These test methods are intended for use with post-installed and placed-during-construction anchors designed for installation projecting from the surface of a masonry test specimen. 1.4 This standard prescribes separate procedures for static, dynamic, fatigue and shock testing. Nothing in this standard, however, shall preclude combined tests incorporating two or more of these types of loading (such as dynamic, fatigue and shock tests in series). 1.5 The text of this standard refers to notes and footnotes that provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard. 1.6 Both inch-pound and SI units are provided in this standard. The testing may be performed in either system and reported in that system and the results converted to the other. However, anchor diameters, threads, and related testing equipment shall be in accordance with either inch-pound or SI provisions. 1.7 Units—The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.8 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C1892/C1892M-22: Standard Test Methods for Strength of Anchors in Masonry provides comprehensive procedures to evaluate the tensile and shear strengths of anchors installed in masonry assemblies. Developed by ASTM International, this standard supports consistent and reproducible testing of post-installed and placed-during-construction anchors under various conditions and loading scenarios. The document is essential for manufacturers, engineers, specifiers, and testing laboratories involved with masonry anchorage systems, ensuring the anchors meet acceptance criteria, design parameters, and relevant specifications.
ASTM C1892/C1892M-22 covers a broad range of topics critical for the standardization and evaluation of anchors in masonry structures, including:
ASTM C1892/C1892M-22 test methods are applied in multiple practical contexts, including:
Другие стандарты ASTM
These applications ensure that building constructions, retrofits, and infrastructure projects benefit from anchors with demonstrated and reliable performance in masonry settings.
ASTM C1892/C1892M-22 references several key standards to ensure the consistency and accuracy of anchor testing in masonry:
These referenced standards help define consistent terminology, calibration procedures, reporting formats, and specific testing details required to implement ASTM C1892/C1892M-22 effectively.
Keywords: anchor strength in masonry, tensile strength, shear strength, post-installed anchors, placed-during-construction anchors, dynamic load testing, masonry assemblies, ASTM masonry standards, environmental exposure, anchor testing laboratory.