ASTM D2847-22 PDF
Standard Practice for Testing Engine Coolants in Car and Light Truck Service
Standard Practice for Testing Engine Coolants in Car and Light Truck Service
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 4
- Дата публикации:
- 1 июня 2022 г.
- Издание:
- D2847
- ICS:
- 71.100.45
SIGNIFICANCE AND USE 5.1 The data obtained from the use of this practice will provide a basis for the evaluation of coolant performance in passenger car, and light-duty truck service (according to the test chosen). The data obtained may also be used to provide added significance to the data obtained from simulated service and engine dynamometer tests. SCOPE 1.1 This practice covers an updated procedure for evaluating corrosion protection and performance of an engine coolant in passenger car, light truck service that closely imitates current vehicle and engine manufacturers’ practices. Note 1: Coolant evaluation in vehicle service may require considerable time and expense; therefore, the product should be pretested in the laboratory for general acceptability. Typical tests vary from small, closely controlled tests, to large tests where close control is not always practical. The most often referenced protocols for laboratory testing are defined in Specifications D3306, D7714, and D7715. 1.2 The units quoted in this practice are to be regarded as standard. The values given in parentheses are approximate equivalents for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautionary statements are given in Section 7. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Abstract
Overview
ASTM D2847-22 Standard Practice for Testing Engine Coolants in Car and Light Truck Service provides a comprehensive methodology for evaluating the corrosion protection and overall performance of engine coolants when used in passenger cars and light-duty trucks. Developed under the guidance of ASTM International, this standard is widely recognized for its alignment with current practices of both vehicle and engine manufacturers. The practice offers a structured approach for conducting real-world, service-based assessment of coolant formulations, supporting manufacturers, fleet operators, and laboratories with scientifically validated protocols for field testing.
Key Topics
- Corrosion Protection Evaluation: The standard outlines test procedures that assess the coolant’s ability to protect vital engine components (radiators, heater cores, water pumps, hoses, and, for heavy-duty applications, cylinder liners) from corrosion and degradation.
- Field versus Laboratory Testing: While vehicle service testing as described in ASTM D2847-22 is thorough, it is recognized as resource-intensive. Thus, pretesting in laboratory settings using ASTM D3306, D7714, and D7715, among others, is recommended to establish basic product acceptability before proceeding with in-vehicle trials.
- Sampling and Inspection: The practice specifies regular sampling and inspection intervals, requiring the harvesting and examination of components such as radiator tubes, hoses, and water pumps, along with coolant samples for chemical analysis (pH, reserve alkalinity, inhibitor concentration, etc.).
- Reporting Requirements: Detailed documentation is required, including the operational conditions, vehicle and coolant data, inspection results, and observations on corrosion, deposits, or failures within the cooling system.
Applications
- Automotive Coolant Manufacturers: ASTM D2847-22 is crucial for product development and quality assurance. Manufacturers use this standard to verify that new coolant formulations provide sufficient corrosion protection and maintain performance standards throughout typical service intervals.
- OEMs and Fleet Operators: Original Equipment Manufacturers (OEMs) and fleet managers rely on these practices to qualify recommended coolants for their vehicles, ensuring optimal performance and longevity of the cooling system under a variety of operational conditions.
- Testing Laboratories: Independent and in-house laboratories apply ASTM D2847-22 to conduct field testing as part of certification, validation, and comparison of engine coolants, interpreting results to inform purchasing or specification decisions.
- Regulatory and Compliance Auditing: The standard supports compliance with international best practices and can aid in addressing warranty and maintenance claims by providing documented, standardized results on real-world coolant performance.
Related Standards
ASTM D2847-22 references and is often used in conjunction with several other key ASTM standards for engine coolants and related chemicals:
- ASTM D3306: Specification for glycol-based engine coolant for automobiles and light-duty service.
- ASTM D7714 & D7715: Specifications for glycerin-base engine coolants for light-duty and heavy-duty service, respectively.
- ASTM D6210: Specification for fully formulated glycol-based coolant for heavy-duty engines.
- ASTM D1121: Test method for reserve alkalinity in coolants.
- ASTM D1287: Test method for pH of engine coolants.
- ASTM D2809: Test method for corrosion characteristics of aluminum pumps.
- ASTM D3321: Test method for freezing point determination using a refractometer.
- ASTM D4725: Terminology for engine coolants and related fluids.
Practical Value
Adopting ASTM D2847-22 ensures that organizations objectively assess the real-world effectiveness of engine coolants, reducing the risk of costly engine damage due to inadequate corrosion protection. Rigorous application of this standard promotes product reliability, user safety, and regulatory compliance-essential considerations in today’s competitive and safety-conscious automotive industry.
Keywords: engine coolant testing, vehicle coolant performance, coolant corrosion protection, ASTM engine coolant standards, field testing coolants, automotive coolant evaluation, radiator corrosion test, ASTM D2847-22
Технические детали
- Технический комитет
- D15 - Engine Coolants and Related Fluids
- SKU
- ASTM D2847-22
Похожие стандарты
Другие стандарты ASTM
ASTM-TPT-47
Phase I & Phase II Environmental Site Assessment Processes
Phase I & Phase II Environmental Site Assessment Processes
ASTM-TPT-8
Phase I Environmental Site Assessment Practices For Commercial Real Estate: Phase I Site Assessment & Transac…
ASTM-TPT-1137
ASTM D975 Standard Specification for Diesel Fuel
ASTM D975 Standard Specification for Diesel Fuel
ASTM-TPT-1202
ASTM D8421 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Ma…
ASTM D8421 Standard Test Method -- eLearning Course
ASTM-TPT-691
Microaprendizagem para D4057: Amostragem de ponto (PT)
D4057 Microlearning: Spot Sampling Portuguese
ASTM-TPT-1091
Metodo de prueba estandar D4052 de ASTM -- Curso de aprendizaje electrónico (ES)
Modulo eLearning para ASTM D4052 en espanol
ASTM ACEM20180086
Using Neutron Radiography to Quantify the Settlement of Fresh Concrete
Specifications have been implemented for concrete bridge decks in North America that restrict the use of higher slump concrete mixtures primarily because of concerns about differential settlement and…
ASTM ACEM20180041
Experimental Study of Competing Failure of Reinforced Concrete Based on the Weibull Distribution
To predict the failure lifetime of reinforced concrete, a current accelerating corrosion test was performed on concrete by simulating the environment in an area with saline soil. To study the concret…