ASTM D4154-22 PDF
Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 4
- Дата публикации:
- 1 ноября 2022 г.
- Издание:
- D4154
- ICS:
- 61.020
SIGNIFICANCE AND USE 5.1 Upon mutual agreement between the purchaser and the supplier, fabrics intended for this end use should meet all of the requirements listed in Table 1 of this performance specification. 5.2 It is recognized that for purposes of fashion or aesthetics, the ultimate consumer of articles made from these fabrics may find acceptable fabrics that do not conform to all of the requirements in Table 1. Therefore, one or more of the requirements listed in Table 1 may be modified by mutual agreement between the purchaser and the supplier. 5.2.1 In such cases, any references to the specification shall specify that: This fabric meets ASTM Specification D4154 except for the following characteristic(s).” 5.3 Where no prepurchase agreement has been reached between the purchaser and the supplier, and in case of controversy, the requirements listed in Table 1 are intended to be used as a guide only. As noted in 5.2, ultimate consumer demands dictate varying performance parameters for any particular style of fabric. 5.4 The uses and significance of particular properties and test methods are discussed in the appropriate sections of the specified test methods. SCOPE 1.1 This performance specification covers knitted and woven fabrics comprised of any textile fiber or mixture of fibers used in men's and boy's beachwear and sports shirts. 1.2 This performance specification is not applicable to knitted and woven fabrics used for interlining and swimwear. 1.3 These requirements apply to both the length and width directions for those properties where fabric direction is pertinent. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Abstract
Overview
ASTM D4154-22: Standard Performance Specification for Men's and Boys' Knitted and Woven Beachwear and Sports Shirt Fabrics provides detailed guidelines for evaluating the quality and performance of textile fabrics intended for use in beachwear and sports shirts for men and boys. Developed by ASTM International, this standard outlines specific requirements and test methods to help manufacturers, suppliers, and purchasers ensure fabric suitability for the intended end use.
This performance specification applies to all types of textile fibers or blends used in knitted and woven fabrics for beachwear and sports shirts, but explicitly excludes fabrics intended for interlining and swimwear. The requirements cover both fabric directions (length and width) wherever that characteristic is relevant, supporting consistent quality across manufacturing and product development processes.
Key Topics
- Performance Requirements: The standard enumerates essential properties such as breaking strength, bursting strength, tear resistance, dimensional change, colorfastness, fabric smoothness, and flammability.
- Mutual Agreement Flexibility: While Table 1 lists all minimum requirements, certain properties may be adjusted by mutual agreement between buyer and supplier to accommodate fashion trends or unique end-user needs.
- Testing Methods: ASTM D4154-22 refers to internationally recognized ASTM and AATCC test methods for evaluating fabric characteristics, ensuring reliability and reproducibility in performance testing.
- Safety and Compliance: The standard emphasizes the importance of complying with local health, safety, and environmental practices and references regulatory requirements, including the Flammable Fabrics Act.
Applications
ASTM D4154-22 is widely used throughout the textile and apparel industry, especially by:
- Fabric Manufacturers: To design and produce beachwear and sports shirt fabrics that reliably meet the defined performance benchmarks.
- Apparel Brands: For specifying quality assurance requirements with suppliers, improving apparel durability, colorfastness, and consumer satisfaction.
- Retailers and Purchasing Agents: For procurement and product development, ensuring products meet consumer expectations and regulatory requirements.
- Testing Laboratories: As a reference for conducting standardized testing on fabric properties such as strength, color retention, and resistance to shrinkage.
Typical practical uses include:
- Sourcing and qualifying fabrics for men's and boys' beachwear and sports shirts.
- Verifying conformity to international quality and safety standards before fabric approval.
- Supporting market claims for product performance (e.g., “colorfast,” “durable,” or “easy care”).
Related Standards
Several other standards are referenced or relevant in the context of ASTM D4154-22:
- ASTM D123: Terminology Relating to Textiles
- ASTM D5034: Breaking Strength and Elongation of Textile Fabrics (Grab Test)
- ASTM D3786 & D3787: Methods for Measuring Bursting Strength of Fabrics
- AATCC Test Methods: Cover various tests for colorfastness (light, laundering, dry cleaning, crocking, bleaching), dimensional stability, and smoothness appearance, such as AATCC 8, 15, 16.3, 61, 96, 124, 135, 172, and 188
- 16 CFR, Flammable Fabrics Act: Regulatory requirements for fabric flammability
Adhering to ASTM D4154-22 helps ensure textiles used for men's and boys' beachwear and sports shirts are not only fit for purpose but also meet market and regulatory standards, thus supporting product performance, brand reputation, and safety standards in the apparel industry.
Keywords: men's beachwear fabric, sports shirts fabric, ASTM D4154-22, textile standard, colorfastness, durability, performance specification, fabric quality, apparel testing
Технические детали
- Технический комитет
- D13 - Textiles
- SKU
- ASTM D4154-22
Похожие стандарты
Другие стандарты ASTM
ASTM-TPT-47
Phase I & Phase II Environmental Site Assessment Processes
Phase I & Phase II Environmental Site Assessment Processes
ASTM-TPT-8
Phase I Environmental Site Assessment Practices For Commercial Real Estate: Phase I Site Assessment & Transac…
ASTM-TPT-1137
ASTM D975 Standard Specification for Diesel Fuel
ASTM D975 Standard Specification for Diesel Fuel
ASTM-TPT-1202
ASTM D8421 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Ma…
ASTM D8421 Standard Test Method -- eLearning Course
ASTM-TPT-691
Microaprendizagem para D4057: Amostragem de ponto (PT)
D4057 Microlearning: Spot Sampling Portuguese
ASTM-TPT-1091
Metodo de prueba estandar D4052 de ASTM -- Curso de aprendizaje electrónico (ES)
Modulo eLearning para ASTM D4052 en espanol
ASTM ACEM20180086
Using Neutron Radiography to Quantify the Settlement of Fresh Concrete
Specifications have been implemented for concrete bridge decks in North America that restrict the use of higher slump concrete mixtures primarily because of concerns about differential settlement and…
ASTM ACEM20180041
Experimental Study of Competing Failure of Reinforced Concrete Based on the Weibull Distribution
To predict the failure lifetime of reinforced concrete, a current accelerating corrosion test was performed on concrete by simulating the environment in an area with saline soil. To study the concret…