ASTM D5617-23 PDF

Overview

ASTM D5617-23: Standard Test Method for Multi-Axial Elongation of Geomembranes specifies a laboratory method to evaluate the out-of-plane mechanical response of geomembranes subjected to forces perpendicular to their surface. Developed by ASTM International’s Committee D35 on Geosynthetics, this standard uses a large-diameter pressure vessel to measure how geomembranes deform and ultimately fail under multi-axial tension. The procedure supports the assessment of geomembranes used in engineering projects such as landfill caps, containment barriers, and other structures where dimensional stability and resistance to subsidence are critical.

This standard is particularly valuable for design engineers and researchers needing realistic, performance-based data about geomembrane behavior under complex loading conditions, unlike traditional uniaxial or small-scale index tests.

Key Topics

• Multi-Axial Elongation: The standard measures how geomembranes deform when force is applied perpendicularly, simulating real-world stresses where subsoil settlement or applied loads act in more than one direction.
• Test Apparatus: Requires a pressure vessel with an inside diameter of 610 mm, capable of both accurate pressure and deflection measurements.
• Specimen Preparation: Samples are cut from defect-free sections, properly conditioned, and clamped to ensure accurate and repeatable results.
• Out-of-Plane Deformation: Monitors the extent to which a geomembrane will stretch or rupture, which is important for applications dealing with subsidence or void formation beneath liners.
• Stress-Strain Calculations: If the specimen takes a predictable geometric form-like an arc of a sphere or an ellipsoid-calculations convert physical measurements into biaxial tensile stress-strain values for quantitative analysis.
• Performance vs. Index Test: Serves as a performance test in scenarios where field conditions can cause similar deformations, or as an index test for comparative evaluations when such loading is unlikely.

Applications

ASTM D5617-23 is most relevant for:

• Geomembrane Material Selection: By simulating realistic loading, the standard supports informed decisions on material suitability, especially for capping systems over unstable subsoil.
• Design Evaluation: Data produced can be directly used in engineering calculations and risk assessments where resistance to multi-axial forces is required.
• Performance Testing: Essential in applications where local subsidence is expected, such as landfills, tailings ponds, and mining containment areas, helping verify liner integrity under possible field-induced deformations.
• Comparative Material Research: Allows researchers and manufacturers to benchmark different geomembrane products under consistent multi-axial loading scenarios.
• Supplementary Index Testing: When field-specific multi-axial stresses are not anticipated, results may serve as a comparative index for routine material evaluations.

Note: Due to its complexity and test duration, ASTM D5617-23 is not recommended for routine quality control testing.

Related Standards

Professionals implementing ASTM D5617-23 may also reference the following ASTM standards for a comprehensive assessment of geosynthetics:

• ASTM D4439 - Terminology for Geosynthetics
• ASTM D5199 - Measuring the Nominal Thickness of Geosynthetics
• ASTM D6693 - Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
• ASTM D5994/D5994M - Measuring Core Thickness of Textured Geomembranes
• ASTM D7003/D7003M - Strip Tensile Properties of Reinforced Geomembranes

These standards, alongside ASTM D5617-23, provide a robust framework for evaluating the physical, mechanical, and engineering performance characteristics of geomembranes and related geosynthetics in critical infrastructure and environmental protection projects.