Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids
SIGNIFICANCE AND USE 4.1 Application of this guide will provide information on the acute toxicity of water-miscible metalworking fluids and will assist the user in evaluating the potential health hazards of the fluid and developing appropriate work practices. A water-miscible metalworking fluid is a concentrate designed to be diluted in water for use. 4.2 Water-miscible metalworking fluids are complex chemical mixtures. The United States Occupational Safety and Health Administration (OSHA) Hazard Communication Standard (see A1.8) outlines procedures for the hazard determination of mixtures and states that if a mixture has not been tested as a whole, then the mixture shall be assumed to present the same hazards as do the components that comprise 1 % (by weight or volume) or greater of the mixture, except that the mixture shall be assumed to present a carcinogenic hazard if it contains a component in concentrations of 0.1 % or greater, which is considered to be a carcinogen (as defined in OSHA Standard 29 CFR 1910.1200). The determination of when to test a mixture as a whole and which toxicity tests are appropriate for the product must be made by a health professional qualified in evaluating toxicological data. 4.3 Acute toxicology testing of water-miscible metalworking fluids consists of several individual tests including acute oral, dermal, or inhalation toxicity, eye irritation, skin irritation or corrosion, or both, skin sensitization, and sensory irritation. Certain protocols for acute oral, dermal, and inhalation toxicity tests are limit tests; further multi-dose testing (for example, Test Method E1103) should take place if mortality is noted on any of these tests. The referenced protocols specify the species and number of animals required. Selection of tests conducted should be designed to minimize the number of animals used. 4.3.1 Acute Oral Toxicity—Acute oral toxicity tests (see A1.1) provide information on health hazards likely to arise from short-term exposure by the ... SCOPE 1.1 This guide defines acute animal toxicity tests and sets forth the references for procedures to assess the acute toxicity of water-miscible metalworking fluids as manufactured. 1.2 Although water-miscible metalworking fluids are typically used at high dilution, dilution rates vary widely. Additionally, there is potential for exposure to the metalworking fluid as manufactured. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM E1302-23: Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids provides a comprehensive framework for assessing the potential acute health hazards presented by water-miscible metalworking fluids. These fluids, typically supplied as concentrates for dilution in water, are widely used in metalworking operations for lubrication and cooling. Because these fluids are complex chemical mixtures, acute toxicity testing is vital for workplace safety, regulatory compliance, and proper product labeling.
This ASTM guide helps users evaluate the risks associated with both the manufactured fluids and their diluted forms, ensuring the adoption of effective occupational health and safety practices. It references federal regulatory standards, such as those from OSHA and the EPA, and aligns with international standardization principles.
The guide is essential for manufacturers, importers, industrial hygienists, and occupational safety professionals involved in metalworking operations and product safety compliance. Practical uses include:
Другие стандарты ASTM
ASTM E1302-23 references several standards and regulatory protocols for acute toxicity evaluation, including:
By providing structured and referenced toxicity testing guidelines, ASTM E1302-23 supports safer workplaces, regulatory compliance, and effective communication of hazards associated with water-miscible metalworking fluids.
Keywords: acute toxicity testing, metalworking fluids, water-miscible fluids, occupational health, hazard communication, OSHA, EPA, safety data sheets, industrial hygiene, workplace safety.