ASTM E2922-23 PDF

SIGNIFICANCE AND USE 4.1 Antimicrobial agents are routinely used for treating textile materials for the reduction of biodeterioration and bacterial odor generation. Furthermore, textiles are treated to prevent or limit microbial cross-contamination in healthcare settings. 4.2 Antimicrobial agents used in textiles will vary with regard to their broad-spectrum effectiveness, biostatic/biocidal properties, and binding properties in or on particular substrates. When selecting antibacterial test methods as the sole means to predict end use behavior it is critical to understand the intended end use conditions of the treated articles. 4.3 Textile materials differ with regard to the knit/weave, fabric composition, and added functional feature (for example, water repellent, flame retardant, softener, whitener). Each of these factors may alter test results within a given method. 4.4 The test methods indicated below differ mainly in the procedure for inoculating samples, levels of nutrients in the bacterial challenge, organisms used, exposure times, and procedure for sterilization of test samples. Each of these parameters are often subject to industry modifications. 4.5 Some antimicrobial treated articles are not suitable for sterilization due to the sensitivity of these antimicrobial agents to high temperature and humidity. Furthermore, some antimicrobial agents may be unrealistically activated due to UV sterilization which could show false positive antimicrobial properties. Sterilization of test fabrics prior to testing should be avoided if possible. All modifications of the methods indicated below should be clearly indicated on associated test reports and should be appropriate to the antimicrobial technology used. 4.6 This guide is intended to review each commonly used industry test standard for its applicability with an understanding of each of the factors listed above. Further, it is the intention of this guide to indicate commonly used and generally accepted modifications of e... SCOPE 1.1 This guide provides users with an index of procedures in the form of test methods, practices, and related international documents that are currently used in the textile industry for determining antibacterial properties of antimicrobial treated textile articles. This guide is not considered as all-inclusive for antimicrobial testing procedures related to textiles. 1.2 This guide identifies some existing ASTM and other industry standard test methods applicable for testing the antibacterial performance on textiles and discusses options within each method that have been used to address specific end-use performance expectations in addition to measuring wash durability of such activity. 1.3 This guide is intended to assist testing facilities in determining which test methods are appropriate for which treated articles based on type of antimicrobial active involved (diffusible versus non-diffusible), nature of test fabric, and expected end use. 1.4 The test methods indicated in this guide should be performed only by those trained in microbiological techniques, are familiar with textile antimicrobial agents and with the end use exposures of the antimicrobial treated textile material. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.