ASTM F2388-21 PDF
Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Количество страниц:
- 14
- Дата публикации:
- 15 ноября 2021 г.
- Издание:
- F2388
- ICS:
- 97.190
ABSTRACT This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing tables and other changing surfaces such as contoured changing pads and add-on changing units that are sold separately for use on furniture products other than changing tables. The torque, tension, structural integrity, and stability shall be tested to meet the requirements prescribed. Each changing table and add-on changing unit or contoured changing pad, sold separately, and its retail package shall be marked or labeled clearly and legibly to indicate the following: name and place of business (city, state, and mailing address, including zip code) or telephone number of either the manufacturer, distributor, or seller; and code mark or other means that identifies the date (month and year as a minimum) of manufacture. Instructions shall be provided with or permanently attached or printed on the changing table, add-on changing unit, or contoured changing pad and shall be easy to read and understand. These instructions shall include information regarding assembly, maintenance, cleaning, and use of the product. SCOPE 1.1 This consumer safety specification covers performance requirements, test methods, and labeling requirements to promote the safe use of baby changing products including changing tables, changing table accessories, contoured changing pads, and add-on changing units. 1.2 This specification covers products sold for domestic use for children up to a weight of 30 lb (13.6 kg). 1.3 Changing products shall meet all applicable performance and labeling requirements. 1.4 No changing product produced after the approval date of this specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all applicable requirements contained herein, before, and after all testing. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test method portion in Section 7 of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory requirements prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Abstract
Overview
ASTM F2388-21: Standard Consumer Safety Specification for Baby Changing Products for Domestic Use is a comprehensive safety standard developed by ASTM International to enhance safety and reduce injury risks associated with baby changing tables, contoured changing pads, and add-on units. This standard provides performance, testing, and labeling requirements for products intended for infants and children up to 30 lb (13.6 kg), ensuring that changing products sold for home use meet stringent quality and safety benchmarks.
The requirements in ASTM F2388-21 are designed to prevent falls, entrapment, suffocation, structural failures, and hazards caused by sharp points and small parts. Labeling and instructional requirements further promote safe use by caregivers. The standard also aligns with international best practices and references key U.S. federal regulations to guide manufacturers and retailers in the baby products market.
Key Topics
ASTM F2388-21 covers the following essential topics:
- Product Scope: Applies to baby changing tables, accessories, contoured changing pads, and add-on changing units intended for domestic use with children up to 30 lb (13.6 kg).
- Performance Requirements: Addresses product integrity, stability, safe barrier construction, entrapment risks, and surface coating regulations.
- Test Methods: Details testing procedures for torque, tension, structural integrity, stability, and protective component retention.
- Marking and Labeling: Requires clear, permanent labeling including manufacturer identification, date of manufacture, and maximum recommended weight.
- Warnings and Instructions: Products must feature explicit warnings regarding fall and suffocation hazards, as well as comprehensive instructions for assembly, use, maintenance, and cleaning.
- Attachment and Conversion: Sets criteria for add-on units or pads sold separately, including secure attachment methods and clear communication about compatible support surfaces.
- Referenced Documents: Relies on standards such as ASTM F963 (Toy Safety), F1169 (Full-Size Baby Cribs), and federal regulations like 16 CFR 1303 (Lead Paint Ban), among others.
Applications
ASTM F2388-21 holds practical significance for a range of stakeholders:
- Manufacturers: Ensures that baby changing products are designed, tested, and labeled to meet rigorous safety standards, reducing liability and market access barriers globally.
- Retailers and Distributors: Provides assurance that products comply with current safety laws, simplifying sourcing decisions and protecting brand reputation.
- Product Designers: Guides the creation of baby changing surfaces and accessories that minimize risk while maximizing usability and compliance.
- Consumers and Caregivers: Offers peace of mind, knowing that changing tables and pads meet recognized safety criteria and carry clear instructions and warnings.
- Compliance Officers: Serves as a benchmark for evaluating product conformity, especially for regulatory submissions and internal audits.
Related Standards
Several key standards and regulations are referenced or associated with ASTM F2388-21:
- ASTM F406: Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- ASTM F963: Toy Safety Standard
- ASTM F1169: Full-Size Baby Cribs Safety Standard
- ASTM F2057: Safety Specification for Clothing Storage Units
- ANSI Z535.4 & Z535.6: Standards for product safety signs, labels, and information manuals
- 16 CFR 1303: US regulation on lead-containing paints and coatings
- Consumer Product Safety Improvement Act (CPSIA)
- 16 CFR 1500 & 1501: Regulations related to hazardous substances and small parts
By adhering to ASTM F2388-21, companies demonstrate a commitment to child safety and regulatory compliance, supporting safer nursery environments and helping prevent injuries during everyday diaper changes.
Keywords: ASTM F2388-21, baby changing table safety, changing pad standards, consumer product safety, domestic use, labeling requirements, performance testing, infant changing products, safety specification, ASTM standard.
Технические детали
- Технический комитет
- F15 - Consumer Products
- SKU
- ASTM F2388-21
Похожие стандарты
Другие стандарты ASTM
ASTM-TPT-47
Phase I & Phase II Environmental Site Assessment Processes
Phase I & Phase II Environmental Site Assessment Processes
ASTM-TPT-8
Phase I Environmental Site Assessment Practices For Commercial Real Estate: Phase I Site Assessment & Transac…
ASTM-TPT-1137
ASTM D975 Standard Specification for Diesel Fuel
ASTM D975 Standard Specification for Diesel Fuel
ASTM-TPT-1202
ASTM D8421 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Ma…
ASTM D8421 Standard Test Method -- eLearning Course
ASTM-TPT-691
Microaprendizagem para D4057: Amostragem de ponto (PT)
D4057 Microlearning: Spot Sampling Portuguese
ASTM-TPT-1091
Metodo de prueba estandar D4052 de ASTM -- Curso de aprendizaje electrónico (ES)
Modulo eLearning para ASTM D4052 en espanol
ASTM ACEM20180086
Using Neutron Radiography to Quantify the Settlement of Fresh Concrete
Specifications have been implemented for concrete bridge decks in North America that restrict the use of higher slump concrete mixtures primarily because of concerns about differential settlement and…
ASTM ACEM20180041
Experimental Study of Competing Failure of Reinforced Concrete Based on the Weibull Distribution
To predict the failure lifetime of reinforced concrete, a current accelerating corrosion test was performed on concrete by simulating the environment in an area with saline soil. To study the concret…