ASTM F887-23 PDF

SCOPE Table of Contents Section Title Section/Paragraph Scope 1 Referenced Documents 2 Terminology 3 Significance and Use 4 Pole and Tree Climbers Classification 5 Ordering Information 6 Pole and Tree Climbers 7 Climber Gaffs 8 Climber Straps 9 Climber Pads 10 Climber Footplates 11 Body Belts, Positioning Devices and Wood Pole Fall Restriction Devices (WPFRD) Classification 12 Ordering Information 13 Two Dee Body Belts, Auxiliary Positioning Belts, and Four Dee Body Belts 14 Two Dee Body Belts 14.1 Auxiliary Positioning Belts and Four Dee Body Belts 14.2 Positioning Devices 15 Wood Pole Fall Restriction Device (WPFRD) 16 Arborist Saddle 17 Harnesses Classification 18 Ordering Information 18.2 Sizing 18.3 Marking 18.4 Energy Absorbing Lanyards Classification 19 Ordering Information 20 Energy Absorbing Lanyards 21 Qualification Testing After Exposure to an Electric Arc 22 Hardware Requirements 23 Test Equipment 24 Qualification Testing 25 Body Belts, Four Dee Body Belts, and Auxiliary Positioning Belts 25.1 Positioning Devices 25.2 WPFRD 25.3 Arborist Saddle 25.4 Harness 25.5 Energy Absorbers 25.6 Instructions 26 Guarantee and Rejection 27 Keywords 28 1.1 This standard covers the specifications and qualification testing of the following: Climbers, Climber straps, Climber Pads, Climber Footplates, Body Belts, Work Positioning Devices with Locking Snaphooks/Carabiners, Wood Pole Fall Restriction Devices (WPFRD), Arborist Saddle, Harnesses, Energy Absorbing Lanyards. These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame. 1.2 Equipment may fall within one of the following categories: 1.2.1 Fall (Travel) Restraint—Prevents a user from reaching a fall hazard (allow 0 fall distance). 1.2.2 Work Positioning—Allows a 2 ft maximum free fall distance. 1.2.3 Fall Arrest—Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb. Note 1: Under certain conditions and with the use of equipment designed for such conditions, a 12-ft free-fall distance with a maximum arrest force of 1800 lb is allowed. 1.2.4 Suspension—Allows 0 free-fall distance while supporting the user’s weight. 1.2.5 Fall Restriction—to prevent or limit free fall from a work position or while ascending/descending a wood pole. 1.3 Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered. 1.4 Two types of body belts, (Types A and B) are covered. 1.5 Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards, (Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered. 1.6 Two types of WPFRD, (Types A and AB) are covered. 1.7 Arborist saddle, (Type A) Work Positioning and Suspension are covered. 1.8 Two types of harnesses, (Types A and B) are covered. 1.9 Two types of energy absorbing lanyards, (Types A and B) are covered. 1.10 The values stated in United States customary units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.11 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.1.4, 15.3, 15.4, 16.2, 17.2, 18.4, 21.2, 22, 23, and 25 of ...