BS EN ISO 2409:2013 PDF

What is this standard about? It details a way of testing how paint coatings resist separation when they’re cut. Who is this standard for?

Paint manufacturers Anyone conducting laboratory or field testing of paints and varnishes

Why should you use this standard? It describes a test method for assessing the resistance of paint coatings to separation from substrates when a right-angle lattice pattern is cut into the coating, penetrating through to the substrate. The method described may be used either as a pass/fail test or, where circumstances are appropriate, as a six-step classification test. When applied to a multi-coat system, assessment of the resistance to separation of individual layers of the coating from each other may be made. Although the test is primarily intended for use in the laboratory, it is also suitable for field testing. The test can be carried out on finished objects and/or on specially prepared test specimens. Although the method is applicable to paint on hard (e.g. metal) and soft (e.g. wood and plaster) substrates, these different substrates need a different test procedure. NOTE: The method is not suitable for coatings of total thickness greater than 250 gm or for textured coatings. The method, when applied to coatings designed to give a rough patterned surface, will give results which will show too much variation. What’s changed since the last update? This standard is a revision of BS EN . The main changes are: