BS EN ISO 4014:2011 PDF
Hexagon head bolts. Product grades A and B
Hexagon head bolts. Product grades A and B
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 марта 2011 г.
- ICS:
- 21.060.10
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 4014:2011
Abstract
1 Scope This International Standard specifies the characteristics of hexagon head bolts with threads from M1,6 up to and including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm, whichever is the shorter, and product grade B for threads over M24 or nominal lengths over 10 d or 150 mm, whichever is the shorter. If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1, ISO 4753 and ISO 4759-1.
Похожие стандарты
Стандарты, упомянутые в описании
SIST EN ISO 7243:2018
ДействующийErgonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature)…
Overview - EN ISO 7243:2017 (WBGT heat stress screening) EN ISO 7243:2017 (Ergonomics of the thermal environment - Assessment of heat stress using the WBGT index) provides a practical, screening meth…
SIST EN ISO 888:2018
ДействующийFasteners - Bolts, screws and studs - Nominal lengths and thread lengths (ISO 888:2012)
Overview EN ISO 888:2018 (ISO 888:2012) - Fasteners: bolts, screws and studs - nominal lengths and thread lengths. This CEN-adopted standard specifies how to define and dimension nominal lengths and…
SIST EN ISO 898-1:2013/AC:2014
ДействующийMechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs wit…
ISO 965-1:2013/Amd 1:2021
ОтменёнISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data — Amendment 1
Overview ISO 965-1:2013/Amd 1:2021 is the latest amendment to the international standard governing general purpose metric screw threads - tolerances, Part 1: Principles and basic data. Developed by I…
SIST EN ISO 3506-1:2020
ДействующийFasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws an…
Overview EN ISO 3506-1:2020 - Fasteners: Mechanical properties of corrosion‑resistant stainless steel fasteners - Part 1 covers the mechanical and physical requirements for bolts, screws and studs ma…
SIST EN ISO 4753:2012
ДействующийFasteners - Ends of parts with external ISO metric thread (ISO 4753:2011)
Overview SIST EN ISO 4753:2012 is an international standard developed by the International Organization for Standardization (ISO) and adopted by the European Committee for Standardization (CEN). The…
SIST EN ISO 4759-1:2002
ДействующийTolerances for fasteners - Part 1: Bolts, screws, studs and nuts - Product grades A, B and C (ISO 4759-1:2000)
Overview EN ISO 4759-1:2000 - Tolerances for fasteners (Part 1) specifies dimensional and geometric tolerances for bolts, screws, studs and nuts with ISO metric threads and defines product grades A,…