BS EN ISO 6721-2:2008 PDF
Plastics. Determination of dynamic mechanical properties - Torsion-pendulum method
Plastics. Determination of dynamic mechanical properties - Torsion-pendulum method
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 июля 2008 г.
- ICS:
- 83.080.01
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 6721-2:2008
Abstract
1 Scope This part of ISO 6721 specifies two methods (A and B) for determining the linear dynamic mechanical properties of plastics, i.e. the storage and loss components of the torsional modulus, as a function of temperature, for small deformations within the frequency range from 0,1 Hz to 10 Hz. The temperature dependence of these properties, measured over a sufficiently broad range of temperatures (for example from −50 °C to +150 °C for the majority of commercially available plastics), gives information on the transition regions (for example the glass transition and the melting transition) of the polymer. It also provides information concerning the onset of plastic flow. The two methods described are not applicable to non-symmetrical laminates (see ISO 6721-3, Plastics — Determination of dynamic mechanical properties — Part 3: Flexural vibration — Resonance-curve method ). The methods are not suitable for testing rubbers, for which the user is referred to ISO 4664-2, Rubber, vulcanized or thermoplastic — Determination of dynamic properties — Part 2: Torsion pendulum methods at low frequencies .
Похожие стандарты
Упомянутые в описании и другие стандарты BS
SIST EN ISO 6721-3:2021
ДействующийPlastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve meth…
Overview EN ISO 6721-3:2021 - "Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method" (ISO 6721-3:2021) specifies a bending-vibration test ba…
BS ISO 4664-2:2006
Rubber, vulcanized or thermoplastic. Determination of dynamic properties - Torsion pendulum methods at low fr…
1 Scope This part of ISO 4664 specifies methods, using a torsion pendulum, of determining the dynamic properties in shear, that is the shear modulus and mechanical damping, of vulcanized or thermopla…