BS ISO 3547-6:2007 PDF
Plain bearings. Wrapped bushes - Checking the inside diameter
Plain bearings. Wrapped bushes - Checking the inside diameter
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 ноября 2007 г.
- ICS:
- 21.100.10
- SKU:
- BS ISO 3547-6:2007
Abstract
1 Scope The part of ISO 3547 specifies, following ISO 12301, the checking of the inside diameter of wrapped bushes (see ISO 3547-2:2006, method C) and describes the necessary checking methods and measuring equipment. Wrapped bushes in the free condition are flexible, but after insertion they adapt largely to the shape of the housing bore due to the interference between the outside diameter of the bush and the housing bore.
NOTE 1 All dimensions in this part of ISO 3547 are given in millimetres except where otherwise noted/designated.
NOTE 2 The dimensions and tolerances of wrapped bushes are given in ISO 3547-1.
NOTE 3 Checking of the wall thickness is the subject of ISO 3547-7.
NOTE 4 Checking of the outside diameter of wrapped bushes is the subject of ISO 3547-5.
Похожие стандарты
Стандарты, упомянутые в описании
ISO 3547-2:2006
ОтменёнPlain bearings — Wrapped bushes — Part 2: Test data for outside and inside diameters
SIST ISO 3547-5:2021
ДействующийPlain bearings - Wrapped bushes - Part 5: Checking the outside diameter
Overview SIST ISO 3547-5:2021 is an international standard developed by the International Organization for Standardization (ISO) that focuses on plain bearings-specifically, wrapped bushes. This part…
SIST ISO 12301:2008
ДействующийPlain bearings - Quality control techniques and inspection of geometrical and material quality characteristics
Overview ISO 12301:2007 - Plain bearings: Quality control techniques and inspection of geometrical and material quality characteristics - specifies quality-control methods and inspection requirements…
SIST ISO 3547-1:2020
ДействующийPlain bearings - Wrapped bushes - Part 1: Dimensions
Overview ISO 3547-1:2018 - Plain bearings - Wrapped bushes - Part 1: Dimensions specifies the dimensional system, designations and tolerancing principles for cylindrical and flanged wrapped bushes ma…
SIST ISO 3547-7:2021
ДействующийPlain bearings - Wrapped bushes - Part 7: Measurement of wall thickness of thin-walled bushes
Overview ISO 3547-7:2020 - "Plain bearings - Wrapped bushes - Part 7: Measurement of wall thickness of thin-walled bushes" specifies checking methods and measuring equipment for determining the total…