BS ISO 6195:2013 PDF

1   Scope This International Standard specifies dimensions and tolerances of housings for wiper rings used in reciprocating rod applications for fluid power cylinders. The range of rod diameters is from 4 mm to 360 mm. This International Standard is applicable to the following five housing designs.

— Type A: recessed housings with undercut or separate cover to retain elastomeric wipers.

— Type B: open recessed housings for wipers with integral rigid enforcement, that are press-fit in the housing.

— Type C: recessed housings with undercut to retain elastomeric wipers (these are the preferred housings for double lip wipers without integral rigid enforcement).

— Type D: recessed housings with undercut to retain elastomer-energized, plastic-faced wipers.

— Type E: recessed housings with undercut or separate cover to retain elastomeric wipers (these are the preferred housings for single lip wipers without integral rigid enforcement).

These housing designs are intended for use with the wiper rings according to Figure 1.

Figure 1 ...