BS EN IEC 60794-1-111:2023
Optical fibre cables - Generic specification. Basic optical cable test procedures. Mechanical tests methods. Bend, method E11
Optical fibre cables - Generic specification. Basic optical cable test procedures. Mechanical tests methods. Bend, method E11
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 октября 2023 г.
- ICS:
- 33.180.10
- Технический комитет:
- CENELEC
- SKU:
- BS EN IEC 60794-1-111:2023
Abstract
1 Scope
This part of [IEC 60794](/search?q=IEC%C2%A060794)
defines the test procedure to determine the ability of an optical fibre cable to
withstand bending around a test mandrel. The primary purpose of this procedure is
to measure the change in attenuation when the cable is bent around a test mandrel.
A secondary purpose is to assess whether the cable has been physically damaged by
bending.
NOTE 1 This test can be utilized at any specified temperature, including the low or high
temperature limits for the cable.
NOTE 2 The bend test procedure for cable elements is specified in [IEC 60794‑1‑301](/search?q=IEC%C2%A060794%E2%80%911%E2%80%91301), method G1.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
SIST EN IEC 60794-1-126:2026
ДействующийOptical fibre cables - Part 1-126: Generic specification - Basic optical cable test procedures - Mechanical t…
Overview SIST EN IEC 60794-1-126:2026 is an international standard that details the basic mechanical test procedures - specifically pertaining to the galloping phenomenon - for optical fibre cables.…
IEC 60794-1-301:2023
ДействующийOptical fibre cables - Part 1-301: Generic specification - Basic optical cable test procedures - Cable elemen…
Overview IEC 60794-1-301:2023 is an international standard by the International Electrotechnical Commission (IEC) focused on test procedures for optical fibre cable elements, specifically addressing…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…