BS EN IEC 60794-1-124:2025
Optical fibre cables - Generic specification. Basic optical cable test procedures. Mechanical tests methods. Installation test for microduct cabling, Method E24
Optical fibre cables - Generic specification. Basic optical cable test procedures. Mechanical tests methods. Installation test for microduct cabling, Method E24
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 августа 2025 г.
- ICS:
- 33.180.10
- SKU:
- BS EN IEC 60794-1-124:2025
Abstract
1 Scope This part of IEC 60794 contains test procedures, referred to as Method E24, for evaluating the behaviour of microduct cabling (microduct optical cable, fibre unit or hybrid cable etc.) when blown into a microduct or protected microduct. This document describes two blowing track layouts: Method A consists of two mandrels and two long straight sections in between (same curvature). Method B consists of 3 mandrels. The middle mandrel forces the cable to experience both left- and right-hand bending, which is a feature of any realistic blowing route. In addition, this document describes an optional procedure to check the capability of blowing out an installed cable.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
SIST EN IEC 60794-1-126:2026
ДействующийOptical fibre cables - Part 1-126: Generic specification - Basic optical cable test procedures - Mechanical t…
Overview SIST EN IEC 60794-1-126:2026 is an international standard that details the basic mechanical test procedures - specifically pertaining to the galloping phenomenon - for optical fibre cables.…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…