BS EN IEC 61095:2025
Electromechanical contactors for household and similar purposes
Electromechanical contactors for household and similar purposes
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 сентября 2025 г.
- ICS:
- 29.120.99
- Технический комитет:
- CENELEC
- SKU:
- BS EN IEC 61095:2025
Abstract
1 Scope
This document applies to electromechanical air break contactors for household and similar purposes provided with main contacts intended to be connected to circuits the rated voltage of which does not exceed 440 V
AC (between phases) with rated operational currents less than or equal to 63 A for
utilization category AC-7a, and 32 A for utilization categories AC-7b, AC-7c and AC-7d (expressed in rated power), and rated conditional short-circuit current less than or equal to 6 kA.
NOTE Today, most LED lamp manufacturers provide information in Watt. So, the main contactor characteristic for utilization category AC-7d is expressed in Watt to be directly applicable to the corresponding LED lamp
load.
Specific requirements apply to contactors equipped with screwless-type terminals.
This document does not apply to
contactors complying with IEC 60947‑4‑1 ;
semiconductor contactors;
contactors designed for special applications;
auxiliary contacts of contactors. These are dealt with in IEC 60947‑5...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 60947-4-1:2023
ДействующийLow-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contacto…
Overview IEC 60947-4-1:2023 is an international standard published by the International Electrotechnical Commission (IEC) that addresses low-voltage switchgear and controlgear, specifically electrome…
IEC 60947-5-9:2006
ДействующийLow-voltage switchgear and controlgear - Part 5-9: Control circuit devices and switching elements - Flow rate…
Overview IEC 60947-5-9:2006 is an international standard developed by the International Electrotechnical Commission (IEC) that addresses low-voltage switchgear and controlgear focused specifically on…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…