BS EN IEC 61223-3-5:2019
Evaluation and routine testing in medical imaging departments - Acceptance and constancy tests. Imaging performance of computed tomography X-ray equipment
Evaluation and routine testing in medical imaging departments - Acceptance and constancy tests. Imaging performance of computed tomography X-ray equipment
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 октября 2022 г.
- ICS:
- 11.040.50
- Технический комитет:
- CENELEC
- SKU:
- BS EN IEC 61223-3-5:2019
Abstract
1 Scope and object This part of IEC 61223 applies to CT scanners that conform to IEC 60601‑2‑44:2009, IEC 60601‑2‑44:2009/AMD1:2012 and IEC 60601‑2‑44:2009/AMD2:2016.
IEC 60601‑2‑44
and this document
• defines the essential parameters which describe the performance of CT scanners with regard to image quality, radiation output and patient positioning; the list of parameters to be tested can be found in 4.3,
• defines the methods of testing the essential parameters, and
• evaluates compliance with the tolerances of the parameters specified by the accompanying documents .
The methods defined in IEC 60601‑2‑44
and this document rely on non-invasive measurements, using appropriate test
equipment, performed during or after installation. Signed statements covering steps
in the installation procedure can be used as part of the acceptance
test report.
This document applies to <span style="font-variant: small-cap...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 61223-3-5:2004
ДействующийEvaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performa…
Overview IEC 61223-3-5:2004 is an international standard established by the International Electrotechnical Commission (IEC) that defines acceptance testing procedures for computed tomography (CT) X-r…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…