BS EN IEC 61400-50-2:2022
Wind energy generation systems - Wind measurement. Application of ground-mounted remote sensing technology
Wind energy generation systems - Wind measurement. Application of ground-mounted remote sensing technology
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 октября 2022 г.
- ICS:
- 27.180
- SKU:
- BS EN IEC 61400-50-2:2022
Abstract
1 Scope IEC 61400‑50 specifies methods and requirements for the application of instruments to measure wind speed (and related parameters, e.g. wind direction and turbulence intensity). Such measurements are required as an input to some of the evaluation and testing procedures for wind energy and wind turbine technology (e.g. resource evaluation and turbine testing) described by other standards in the IEC 61400 series . This document is applicable specifically to the use of ground-mounted remote sensing wind measurement instruments, i.e. devices which measure the wind at some location generally above and distant from the location at which the instrument is mounted (e.g. sodars, vertical profiling lidars). This document specifically excludes other types of RSD such as forward facing or scanning lidars. This document specifies the following:
the procedure and requirements for classifying ground-based RSDs in order to assess
the uncertainty pertaining from sensitivity of the RSD response to meteorological
conditions that can vary between the RSD calibration place and time and the use case
(specific measurement campaign – SMC) place and time;
the procedures and requirements for calibration of RSDs;
...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 61400-50-2:2022
ДействующийWind energy generation systems - Part 50-2: Wind measurement - Application of ground-mounted remote sensing t…
Overview IEC 61400-50-2:2022 is an international standard published by the International Electrotechnical Commission (IEC) that focuses on wind energy generation systems, specifically addressing the…
IEC 61400-27-1:2015
ДействующийWind turbines - Part 27-1: Electrical simulation models - Wind turbines
Overview IEC 61400-27-1:2015 is an international standard published by the International Electrotechnical Commission (IEC) that defines electrical simulation models for wind turbines. This part 27-1…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…