BS EN ISO 14720-2:2013
Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning…
Testing of ceramic raw and basic materials. Determination of sulfur in powders and granules of non-oxidic ceramic raw and basic materials - Inductively coupled plasma optical emission spectrometry (ICP/OES) or ion chromatography after burning…
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 апреля 2013 г.
- ICS:
- 81.060.10
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 14720-2:2013
Abstract
1 Scope This part of ISO 14720 defines a method for the determination of sulfur in powdered and granular non-oxidic ceramic raw materials and materials, which are completely oxidized at a higher temperature in an oxygen atmosphere, e.g. carbon and graphite materials. For materials which are not completely oxidizable under these conditions, it is possible to determine sulfur that can be released under these conditions, e.g. the adherent sulfur. This part of ISO 14720 is applicable for materials with mass fractions of sulfur ≤ 10 % and mass fractions of ash < 20 %, The defined method is limited for materials with mass fractions of barium < 10 mg/kg, because the sulfur bonded in barium sulfate is not detectable with this method. For the lower detection limit of this method, a mass fraction of sulfur of 0,5 mg/kg in the case of inductively coupled plasma optical emission spectrometry (ICP/OES) and 5 mg/kg in the case of ion chromatography (IC) has to be considered as a recommended value.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 14720-1:2013
ОтменёнTesting of ceramic raw and basic materials — Determination of sulfur in powders and granules of non-oxidic ce…
Overview ISO 14720-1:2013 specifies an infrared measurement method for the determination of sulfur in powdered and granular non-oxidic ceramic raw and basic materials. Typical materials covered inclu…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…