BS EN ISO 17872:2007
Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
Paints and varnishes. Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 28 сентября 2007 г.
- ICS:
- 87.040
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 17872:2007
Abstract
1 Scope This International Standard describes methods of scribing coated steel or test-pieces for corrosion tests, where the coating system is applied at dry film thicknesses of less than 500 μm. It is intended as a guideline only, being based on the results of a collaborative trial with no subsequent corrosion testing having been carried out to determine the suitability of the introduced scribe marks for such tests. This International Standard covers the scribing of metallic panels or test pieces made from
— steel,
— chemically treated steel,
— aluminium or aluminium alloy, and
— chemically treated aluminium.
It does not cover the scribing of galvanized or electroplated metal or clad aluminium panels.
Похожие стандарты
Другие стандарты BS
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…