BS EN ISO 18134-3:2015
Solid biofuels. Determination of moisture content. Oven dry method - Moisture in general analysis sample
Solid biofuels. Determination of moisture content. Oven dry method - Moisture in general analysis sample
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 октября 2015 г.
- ICS:
- 75.160.40
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 18134-3:2015
Abstract
What is ISO 18134-3- M oisture content in solid biofuels about?
ISO 18134-3 is a safety standard on solid biofuels . ISO 18134-3 describes the method of determining moisture in the analysis test sample by drying in an oven. ISO 18134-3 is intended to be used for general analysis samples in accordance with EN 14780 . The method described in ISO 18134-3 is applicable to all solid biofuels.
The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis). Since biofuels in small particle size are very hygroscopic, their moisture content will change with humidity in the atmosphere and therefore, the moisture of the test portion is determined simultaneously with the determination of, for example, calorific value, carbon content, and nitrogen content.
Note: The term moisture content when used with biomass materials can be misleading since ...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 18134-3:2023
ДействующийSolid biofuels — Determination of moisture content — Part 3: Moisture in general analysis sample
Overview ISO 18134-3:2023 specifies the oven-drying method to determine moisture content in the general analysis sample of solid biofuels. The method applies to all solid biofuels and requires report…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…