BS EN ISO 2639:2002
Steels. Determination and verification of the depth of carburized and hardened cases
Steels. Determination and verification of the depth of carburized and hardened cases
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 27 ноября 2002 г.
- ICS:
- 77.040.99
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 2639:2002
Abstract
1 Scope This International Standard defines the case-hardened depth, and specifies methods for the determination of this depth, in steel. It is applicable to
a) carburized cases and carbonitrided cases;
b) parts that, when heat treated to final hardness, have a hardness of less than 450 HV 1 at a distance of three times the case-hardened depth, from the surface.
The case-hardened depth is defined by special agreement where these conditions are
not met.
For steels that, in the part under test, and at a distance of three times the case-hardened
depth from the surface, present a hardness greater than 450 HV 1, the criterion can
still be used, provided that a limiting hardness value greater than 550 HV 1 – in
steps of 25 units – be selected for the case-hardened depth.
Похожие стандарты
Другие стандарты BS
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…