BS EN ISO 4545-1:2018
Metallic materials. Knoop hardness test - Test method
Metallic materials. Knoop hardness test - Test method
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 марта 2018 г.
- ICS:
- 77.040.10
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 4545-1:2018
Abstract
1 Scope This document specifies the Knoop hardness test method for metallic materials for test forces from 0,009 807 N to 19,613 N. The Knoop hardness test is specified in this document for lengths of indentation diagonals ≥0,020 mm. Using this method to determine Knoop hardness from smaller indentations is outside the scope of this document as results would suffer from large uncertainties due to the limitations of optical measurement and imperfections in tip geometry. ISO 14577-1 allows the determination of hardness from smaller indentations. A periodic verification method is specified for routine checking of the testing machine in service by the user. Special considerations for Knoop testing of metallic coatings can be found in ISO 4516.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
BS EN ISO 14577-1:2026
ДействующийMetallic materials. Instrumented indentation test for hardness and materials parameters. Test method.
BS EN ISO 4516:2002
ДействующийMetallic and other inorganic coatings. Vickers and Knoop microhardness tests.
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…