BS EN ISO 8407:2014
Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 ноября 2009 г.
- ICS:
- 77.060
- Технический комитет:
- CEN
- SKU:
- BS EN ISO 8407:2014
Abstract
1 Scope This International Standard specifies procedures for the removal of corrosion products formed on metal and alloy corrosion test specimens during their exposure in corrosive environments. For the purpose of this International Standard, the term “metals” refers to pure metals and alloys. The specified procedures are designed to remove all corrosion products without significant removal of base metal. This allows an accurate determination of the mass loss of the metal, which occurred during exposure to the corrosive environment. These procedures may, in some cases, also be applied to metal coatings. However, possible effects from the substrate must be considered.
Похожие стандарты
Другие стандарты BS
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…