BS IEC 60287-3-1:2017
Electric cables. Calculation of the current rating - Operating conditions. Site reference conditions
Electric cables. Calculation of the current rating - Operating conditions. Site reference conditions
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 апреля 2020 г.
- ICS:
- 29.060.20
- SKU:
- BS IEC 60287-3-1:2017
Abstract
What is BS IEC 60287-3-1- Site reference conditions for electric cables about?
BS IEC 60287 is an international standard on electric cables and the calculation of the current rating.
BS IEC 60287-3-1 is applicable to the conditions of steady-state operation of cables at all voltages, buried directly in the ground, in ducts, troughs, or in steel pipes, both with and without partial drying-out of the soil, as well as cables in the air.
The term "steady-state" is intended to mean a continuous constant current (100 % load factor) just sufficient to produce asymptotically the maximum conductor temperature, the surrounding ambient conditions being assumed constant.
Who is BS IEC 60287-3-1 - <b...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 60287-3-1:2017
ДействующийElectric cables - Calculation of the current rating - Part 3-1: Operating conditions - Site reference conditi…
Overview IEC 60287-3-1:2017 - part of the IEC 60287 series on electric cable current rating - defines site reference operating conditions for the steady‑state calculation of cable current ratings (am…
IEC 60287-2-3:2017
ДействующийElectric cables - Calculation of the current rating - Part 2-3: Thermal resistance - Cables installed in vent…
Overview IEC 60287-2-3:2017 is an international standard published by the International Electrotechnical Commission (IEC) that provides a standardized method for calculating the continuous current ra…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…