BS IEC 62396-5:2014
Process management for avionics. Atmospheric radiation effects - Assessment of thermal neutron fluxes and single event effects in avionics systems
Process management for avionics. Atmospheric radiation effects - Assessment of thermal neutron fluxes and single event effects in avionics systems
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 августа 2014 г.
- ICS:
- 03.100.50
- SKU:
- BS IEC 62396-5:2014
Abstract
1 Scope The purpose of this part of IEC 62396 is to provide a more precise definition of the threat that thermal neutrons pose to avionics as a second mechanism for inducing single event upset (SEU) in microelectronics. There are two main points that will be addressed in this part of IEC 62396:
a) a detailed evaluation of the existing literature on measurements of the thermal flux inside of airliners, and
b) an enhanced compilation of the thermal neutron SEU cross-section in currently available SRAM devices (more than 20 different devices).
The net result of the reviews of these two different sets of data will be two ratios that are considered to be very important for leading to the ultimate objective of how large a threat is the SEU rate from thermal neutrons compared to the SEU threat from the high energy neutrons ( E >10 MeV). The threat from the high energy neutrons has been dealt with extensively in the literature and has been addressed by two standards (IEC 62396‑1 in avionics and JESD89A [1] 1 in microelectronics on the ground). Neutrons with E > 1 MeV are considered for parts with geometries below 150 nm.
NOTE Reference is made to [IEC 62396‑1](/search?q=IEC%C2%A062396%E2%80%911):2012, 5.3.2, for smaller geometry parts below 150 nm which provides the neutron flux for energies above 1 MeV.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 62396-3:2013
ДействующийProcess management for avionics - Atmospheric radiation effects - Part 3: System design optimization to accom…
Overview IEC 62396-3:2013 - "Process management for avionics - Atmospheric radiation effects - Part 3: System design optimization to accommodate the single event effects (SEE) of atmospheric radiatio…
IEC 62396-1:2016
ДействующийProcess management for avionics - Atmospheric radiation effects - Part 1: Accommodation of atmospheric radiat…
Overview IEC 62396-1:2016 - Process management for avionics: Atmospheric radiation effects - Part 1 provides guidance for the accommodation of atmospheric radiation effects via single event effects (…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…