BS ISO 20806:2009
Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
Mechanical vibration. Criteria and safeguards for the in-situ balancing of medium and large rotors
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 июля 2010 г.
- ICS:
- 21.120.40
- SKU:
- BS ISO 20806:2009
Abstract
1 Scope This International Standard specifies procedures to be adopted when balancing medium and large rotors installed in their own bearings on site. It addresses the conditions under which it is appropriate to undertake in-situ balancing, the instrumentation required, the safety implications and the requirements for reporting and maintaining records. This International Standard can be used as a basis for a contract to undertake in-situ balancing. It does not provide guidance on the methods used to calculate the correction masses from measured vibration data.
NOTE The procedures covered in this International Standard are suitable for medium and
large machines. However, many of the principles are equally applicable to machines
of a smaller size, where it is necessary to maintain good records of the vibration
behaviour and the correction mass configurations.
Похожие стандарты
Другие стандарты BS
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…