BS ISO 21438-1:2007
Workplace atmospheres. Determination of inorganic acids by ion chromatography - Part 1: Non-volatile acids (sulfuric acid and phosphoric acid)
Workplace atmospheres. Determination of inorganic acids by ion chromatography - Part 1: Non-volatile acids (sulfuric acid and phosphoric acid)
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 января 2008 г.
- ICS:
- 13.040.30
- SKU:
- BS ISO 21438-1:2007
Abstract
1 Scope This part of ISO 21438 specifies a method for the determination of the time-weighted average mass concentration of sulfuric acid and phosphoric acid in workplace air by ion chromatography. The method is applicable to the personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708 and to static (area) sampling. The analytical method is applicable to the determination of masses of 0,005 mg to 2,0 mg of sulfuric acid and phosphoric acid per sample, without dilution. The concentration range of sulfuric acid and phosphoric acid in air for which the measuring procedure is applicable is determined by the sampling method selected by the user. For an air sample of volume 1 m 3 , the working range is approximately 0,005 mg m −3 to 2,0 mg m −3 . The method is not applicable to the determination of sulfur trioxide. The procedure does not allow differentiation between the acids and their corresponding salts if both are present in the air. The procedure does not allow differentiation between phosphoric acid and diphosphorus pentoxide (phosphoric anhydride) if both are present in the workplace .
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 21438-1:2007
ОтменёнWorkplace atmospheres — Determination of inorganic acids by ion chromatography — Part 1: Non-volatile acids (…
ISO 7708:1995
ДействующийAir quality — Particle size fraction definitions for health-related sampling
Overview ISO 7708:1995 - "Air quality - Particle size fraction definitions for health-related sampling" defines internationally accepted sampling conventions for airborne particle size fractions used…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…