BS ISO 4917-5:2024
Design of nuclear power plants against seismic events - Seismic instrumentation
Design of nuclear power plants against seismic events - Seismic instrumentation
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 октября 2024 г.
- ICS:
- 27.120.20
- SKU:
- BS ISO 4917-5:2024
Abstract
1 Scope This document specifies the utilization and characteristics of instrumentation used to detect seismic events at nuclear power plants with water cooled reactors. The document can also be applied to other nuclear facilities after verifying its applicability. The following types of electrical systems and equipment are not covered by this document:
seismic instrumentation involved in the implementation of nuclear safety functions
as defined by IEC 61226 , for example automatic shutdown systems;
seismic instrumentation not involved in the implementation of nuclear safety functions
as defined by IEC 61226 but which due, for example, to close proximity to other safety classified systems,
requires hardware qualification to be performed.
Such systems are specified, designed, manufactured, qualified, operated and dismantled according to the relevant requirements of IEC standards, in particular IEC 61513 and the lower level IEC standards according to the safety class and technologies used. Seismic instrumentation used for the implementation of seismic...
Похожие стандарты
Упомянутые в описании и другие стандарты BS
IEC 61226:2020
ДействующийNuclear power plants - Instrumentation, control and electrical power systems important to safety - Categoriza…
Overview IEC 61226:2020 is an international standard developed by the International Electrotechnical Commission (IEC) that specifies the categorization of functions and classification of instrumentat…
IEC 61513:2026
ДействующийNuclear power plants - Instrumentation and control important to safety - General requirements for systems
Overview IEC 61513:2026 “Nuclear power plants - Instrumentation and control important to safety - General requirements for systems,” published by the International Electrotechnical Commission (IEC),…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…