BS ISO 6721-11:2012
Plastics. Determination of dynamic mechanical properties - Glass transition temperature
Plastics. Determination of dynamic mechanical properties - Glass transition temperature
- Статус документа:
- Отменён
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 апреля 2012 г.
- ICS:
- 83.080.01
- SKU:
- BS ISO 6721-11:2012
Abstract
1 Scope This part of ISO 6721 specifies methods for determining a value of the glass transition temperature ( T g ) from the dynamic mechanical properties measured during a linear temperature scan under heating conditions. The glass transition temperature is an indicator of the transition from a glassy state to a rubbery state. Usually referred to as dynamic mechanical analysis (DMA), the methods and their associated procedures can be applied to unreinforced and filled polymers, foams, rubbers, adhesives and fibre-reinforced plastics/composites. Different modes (e.g. flexure, compression, tension) of dynamic mechanical analysis can be applied, as appropriate, to the form of the source material.
NOTE For tests undertaken in the flexure or torsion mode, an additional procedure is included to identify the severity of the influences of thermal lag on the measured data (see Annex B).
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 6721-8:2019
ДействующийPlastics — Determination of dynamic mechanical properties — Part 8: Longitudinal and shear vibration — Wave-p…
Overview ISO 6721-8:2019 - "Plastics - Determination of dynamic mechanical properties - Part 8: Longitudinal and shear vibration - Wave‑propagation method" specifies an ultrasonic wave propagation me…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…