BS ISO 7388-1:2007
Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
- Статус документа:
- D
- Формат:
- Электронный (PDF)
- Дата публикации:
- 28 сентября 2007 г.
- ICS:
- 25.060.20
- SKU:
- BS ISO 7388-1:2007
Abstract
1 Scope This part of ISO 7388 specifies the dimensions of tool shanks with a 7/24 taper, of shank forms A, AD, AF, U, UD and UF (with two possible additions for each), for automatic tool changers, used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 7388-3:2016
ДействующийTool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD…
Overview ISO 7388-3:2016 defines the dimensions and designation of retention knobs for tool shanks with a 7/24 taper used in automatic tool changers (ATC). It covers retention knob forms AD, AF, UD,…
ISO 9270-2:2010
Действующий7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of…
Overview ISO 9270-2:2010 defines the dimensions and tolerances for 7/24 taper spindle noses with tenons used in automatic tool changers, specifically spindle-nose forms J and JF. The standard provide…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…