BS ISO 7388-2:2007
Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms J, JD and JF
Tool shanks with 7/24 taper for automatic tool changers - Dimensions and designation of shanks of forms J, JD and JF
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 28 сентября 2007 г.
- ICS:
- 25.060.20
- SKU:
- BS ISO 7388-2:2007
Abstract
1 Scope This part of ISO 7388 specifies the dimensions of tool shanks with a 7/24 taper of shank form J (with two possible additions for each) for automatic tool changers used on machines having an automatic gripping system for feeding tools from the magazine to the spindle and vice-versa. These tools are designed with the most important dimensions for use in spindle noses according to ISO 9270.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 7388-3:2016
ДействующийTool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD…
Overview ISO 7388-3:2016 defines the dimensions and designation of retention knobs for tool shanks with a 7/24 taper used in automatic tool changers (ATC). It covers retention knob forms AD, AF, UD,…
ISO 9270-2:2010
Действующий7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of…
Overview ISO 9270-2:2010 defines the dimensions and tolerances for 7/24 taper spindle noses with tenons used in automatic tool changers, specifically spindle-nose forms J and JF. The standard provide…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…