BS ISO 7981-1:2005
Water quality. Determination of polycyclic aromatic hydrocarbons (PAH) - Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extraction
Water quality. Determination of polycyclic aromatic hydrocarbons (PAH) - Determination of six PAH by high performance thin layer chromatography with fluorescence detection after liquid-liquid extraction
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 1 августа 2005 г.
- ICS:
- 13.060.50
- SKU:
- BS ISO 7981-1:2005
Abstract
1 Scope This part of ISO 7981 specifies the determination of six selected PAH in drinking water by high-performance thin-layer chromatography with fluorescence detection after liquid-liquid extraction. The six PAH are: fluoranthene, benzo[ b ]fluoranthene, benzo[ a ]pyrene, benzo[ k ]fluoranthene, indeno[1,2,3- cd ]pyrene, and benzo[ ghi ]perylene (see Table 1). A screening method (method A) is described to exclude those samples containing less than 20 % of the limit values given in References [1], [2], [3] and [4]. A quantitative method (method B) is also described, with a working range of 40 ng/l to 240 ng/l (sum of 6 PAH). Higher concentrations can be determined by using a smaller aliquot of the sample. With some modifications, this method is also applicable for the analysis of ground waters and moderately polluted surface waters.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 7981-1:2005
ДействующийWater quality — Determination of polycyclic aromatic hydrocarbons (PAH) — Part 1: Determination of six PAH by…
Overview ISO 7981-1:2005 - "Water quality - Determination of polycyclic aromatic hydrocarbons (PAH) - Part 1" specifies a laboratory method to determine six priority PAH in drinking water. The method…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…