BS ISO 834-7:2025
Fire-resistance tests. Elements of building construction - Specific requirements for columns
Fire-resistance tests. Elements of building construction - Specific requirements for columns
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 июля 2025 г.
- ICS:
- 13.220.50
- SKU:
- BS ISO 834-7:2025
Abstract
1 Scope This document specifies the procedures to be followed for determining the fire resistance of columns when tested on their own. Two methods of testing are described:
Method A, which is applicable to any type of column and in which the test is conducted with an applied axial load to the column; and
Method B, which is only applicable to protected steel columns with any type of protection system and in which the test is conducted with no load
applied to the column and the fire resistance is determined based on steel temperature limits.
Method B is only applicable to protection systems that do not support any of the structural load. (See A.6). The application of this test to other untested forms of construction is acceptable when the construction conforms to the direct field of application as given in Annex B of this document, or when subjected to an extended application analysis in accordance with ISO/TR 12470 (series) [ 1 ] . General guidance on test method A and test method B is given in Annex A.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO/TR 12470-1:2017
ДействующийFire-resistance tests — Guidance on the application and extension of results from tests conducted on fire con…
Overview ISO/TR 12470-1:2017 provides guidance for applying and extending results from fire-resistance tests on fire containment assemblies and products - specifically for loadbearing elements and ve…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…