BS ISO 8568:2007
Mechanical shock. Testing machines. Characteristics and performance
Mechanical shock. Testing machines. Characteristics and performance
- Статус документа:
- D
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 января 2008 г.
- ICS:
- 17.160
- SKU:
- BS ISO 8568:2007
Abstract
BS ISO 8568:2007 specifies performance parameters and methods of inspection of mechanical shock-testing machines and gives guidelines for describing their characteristics. It is intended to ensure that the potential user of a particular shock-testing machine is provided with an adequate description of the characteristics of the machine, and also to give guidance on the selection of such machines. BS ISO 8568 is applicable to the shock-testing machines that are used for demonstrating or evaluating the effect of shock conditions representative of the service environment in accordance with the relevant part of IEC 60068 and also for diagnostic testing. The purpose of the shock test is to reveal mechanical weakness and/or degradation in specified performance. It can also be used to determine the structural integrity of a test specimen or as a means of quality control. Several techniques for generating the desired shock motion are discussed. Both simple-pulse and complex transients can be produced. The simulation of transients can be achieved by control of the test with a specified shock-response spectrum. Machines used for simulation of earthquakes, sonic booms, explosions and implosions, bursting tests, metalworking, forming, etc. are not covered by BS ISO 8568.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 8568:2007
ДействующийMechanical shock — Testing machines — Characteristics and performance
Overview ISO 8568:2007 - Mechanical shock - Testing machines - Characteristics and performance defines performance parameters, inspection methods and specification guidance for mechanical shock‑testi…
IEC 60068-2-21:2021
ДействующийEnvironmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices
Overview IEC 60068-2-21:2021 is an International Electrotechnical Commission (IEC) standard focused on environmental testing, specifically Test U, which assesses the robustness of terminations and in…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…