BS ISO 8820-5:2015
Road vehicles. Fuse-links - Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
Road vehicles. Fuse-links - Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures
- Статус документа:
- D
- Формат:
- Электронный (PDF)
- Дата публикации:
- 31 марта 2015 г.
- ICS:
- 43.040.10
- SKU:
- BS ISO 8820-5:2015
Abstract
1 Scope This part of ISO 8820 specifies fuse-links with axial terminals (Strip fuse-links) Type SF 30 and SF 51 and test fixtures for fuses in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements, and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 32 V, a current rating of 30 A to 500 A, and a breaking capacity of 2 000 A intended for use in the electrical system of road vehicles with a nominal voltage of 12 V and/or 24 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its Clauses corresponds to that of ISO 8820-1, whose requirements are applicable except where modified by requirements particular to this part of ISO 8820.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 8820-12:2020
ДействующийRoad vehicles — Fuse-links — Part 12: Fuse-links with tabs (blade type) Type N (sub miniature)
Overview ISO 8820-12:2020 defines requirements for fuse-links with tabs (blade-type) Type N (sub‑miniature) intended for road vehicles. The standard covers rated currents up to ≤30 A, a rated voltage…
ISO 8820-2:2014
ДействующийRoad vehicles — Fuse-links — Part 2: User guidelines
Overview ISO 8820-2:2014 - "Road vehicles - Fuse-links - Part 2: User guidelines" provides practical guidance for selecting and applying automotive fuse-links defined in the ISO 8820 series. It is in…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…