BS ISO 9022-17:2015
Optics and photonics. Environmental test methods - Combined contamination, solar radiation
Optics and photonics. Environmental test methods - Combined contamination, solar radiation
- Статус документа:
- Действующий
- Формат:
- Электронный (PDF)
- Дата публикации:
- 30 апреля 2015 г.
- ICS:
- 37.020
- SKU:
- BS ISO 9022-17:2015
Abstract
1 Scope This part of ISO 9022 specifies the methods relating to the environmental tests of optical instruments and including additional assemblies from other fields (e.g. mechanical, chemical, and electronic devices) under equivalent conditions, for their ability to resist the influence of combined contamination and solar radiation. “Contamination”, as used in this part of ISO 9022, means the contact of optical instruments with corrosive chemical substances (hereafter called test agents). Complete instruments or assemblies are, however, not be tested to this part of ISO 9022 except for special reasons (refer to ISO 9022-12). As a rule, representative substrates are used as specimens. The tests described in this part of ISO 9022 are designed for the selection of materials and components for instruments likely to be subjected to combined contamination and solar radiation during service life, rather than for regular production control. The purpose of testing is to investigate the resistance of an instrument, and in particular, of instrument surfaces, coatings, or synthetic materials, to a short-time exposure to the test agents combined with solar radiation.
Похожие стандарты
Упомянутые в описании и другие стандарты BS
ISO 9022-11:2015
ДействующийOptics and photonics — Environmental test methods — Part 11: Mould growth
Overview ISO 9022-11:2015 - Optics and photonics: Environmental test methods - Part 11: Mould growth specifies laboratory procedures to evaluate how optical components and representative specimens re…
ISO 9022-1:2016
ДействующийOptics and photonics — Environmental test methods — Part 1: Definitions, extent of testing
ISO 9022-1:2016 - Optics and photonics: Environmental test methods (Part 1) ## Overview ISO 9022-1:2016 is the first part of the ISO 9022 series for optics and photonics. It defines the terminology,…
BS ISO 10835:2007
ДействующийDirect reduced iron and hot briquetted iron. Sampling and sample preparation.
1 Scope This International Standard gives a) the underlying theory, b) the basic principles for sampling and preparation of samples , and c) the basic requirements for the design, installation and op…