ISO 10033-2:2011

Overview

ISO 10033-2:2011 defines the bonding quality requirements for Laminated Veneer Lumber (LVL) bonded with thermosetting resins. It specifies how to classify LVL into bonding classes according to intended end use and moisture exposure, and it sets pass/fail criteria based on delamination after prescribed pre-treatments and tests (test procedures are given in ISO 10033-1). The standard helps manufacturers, testing laboratories and specifiers determine whether an LVL product meets the necessary bond durability for interior, tropical or exterior applications.

Key topics and requirements

• Bonding classes
  • Class 1 – Dry conditions: for interior climates (equilibrium moisture content ≤ 12%).
  • Class 2 – Tropical dry/humid conditions: for protected exterior use and higher interior service moisture (EMC ≤ 18%).
  • Class 3 – High humid/exterior conditions: for prolonged weather exposure or higher EMC than Class 2.
• Pre-treatments
  • One basic pre‑treatment must be selected; for Class 2 and 3 an additional severe pre‑treatment is also required.
  • Basic options: 24 h soak, vacuum‑pressure (VP) soak, hot water conditioning.
  • Additional options: 6 h boil, boil‑dry‑boil (BDB), 72 h boil, steam.
  • Note: full phenolic adhesives may need less frequent additional pre‑treatment when VP is used.
• Glueline performance criteria
  • Individual glueline delamination must not exceed 25%.
  • Total delamination across all gluelines must not exceed 5%.
  • Minimum of two test pieces per sample; for classes requiring two pre‑treatments each treatment is applied to separate test pieces.
• Accepted test routes (ISO 10033-1)
  • Shear test (Annex A) - gluelines must also satisfy ISO 12466-2 requirements.
  • Chisel/knife testing (Annex B) - average bond quality per glueline ≥ 2 and overall bond quality ≥ 5.

Applications and users

• Who uses ISO 10033-2: manufacturers of LVL, QA/QC and materials testing laboratories, product certification bodies, timber engineers, architects and spec writers.
• Practical uses:
  • Specify LVL bonding class in procurement and design (interior vs. protected exterior vs. exterior).
  • Validate adhesive systems and production processes (pre‑treatment and curing).
  • Support product certification and conformity assessment for structural and non‑structural LVL applications.
  • Guide failure analysis and corrective actions for delamination issues.

Related standards

• ISO 10033-1: Laminated Veneer Lumber (LVL) - Bonding quality - Part 1: Test methods (test procedures referenced by this part).
• ISO 18776: LVL - Specifications (relates bonding classes to product specifications).
• ISO 12466-2: Plywood - Bonding quality - Part 2: Requirements (used when shear test is applied).

Keywords: ISO 10033-2, Laminated Veneer Lumber, LVL bonding quality, glueline, delamination, thermosetting resins, pre‑treatment, bonding classes, ISO 10033-1.