ISO 10239:2014

Name: ISO 10239:2014 — Small craft — Liquefied petroleum gas (LPG) systems
SKU: ISO 10239:2014
Price: 25 EUR
Availability: InStock

Small craft — Liquefied petroleum gas (LPG) systems

Название (английский):

ISO 10239:2014

Small craft — Liquefied petroleum gas (LPG) systems

Статус документа:: Отменён
Формат:: Электронный (PDF)
Количество страниц:: 17
Дата публикации:: 28 ноября 2014 г.
Издание:: ISO IS 10239 edition 3 version 1
ICS:: 47.080

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 10239:2014 covers the installation of permanently installed liquefied petroleum gas LPG systems and LPG burning appliances on small craft of up to 24 m length of hull. It does not cover devices used for LPG-fuelled propulsion engines or LPG-driven generators. It covers cooking appliances with internal LPG cartridges, with a capacity of 225 g or less (See Annex D). It covers storage of all LPG cylinders but is not intended to regulate the technical requirements for such cylinders that are subject to national regulations It does not contain procedures for commissioning the LPG installation.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 10239:2014 - Small craft - Liquefied petroleum gas (LPG) systems specifies requirements for the installation, location and safety of permanently installed LPG systems and LPG-burning appliances on small craft up to 24 m hull length. It excludes LPG-fuelled propulsion engines and LPG-driven generators, and it does not contain commissioning procedures. The standard also addresses cooking appliances with integral LPG cartridges up to 225 g (Annex D) and storage arrangements for LPG cylinders (without prescribing cylinder design, which remains subject to national rules).

Key technical topics and requirements

Scope and applicability: Fixed LPG systems on small craft (≤24 m); excludes propulsion/generator units; covers integral cartridge appliances ≤225 g.

System type and environmental limits: Systems must be of the vapour withdrawal type and designed for storage temperatures from −30 °C to +60 °C.

Pressure regulation: A pressure regulation device is required, supplying a defined operating pressure (labelled near the cylinder shut-off valve) - operating pressure ≤ 5 kPa; overpressure protection must prevent low‑pressure side exceeding 15 kPa.

Leakage testing and checks: Provision for simple in-service leakage checks (pressure gauge or bubble leak tester); guidance on gauge ranges and bubble detector placement is included.

Supply line and components: Requirements for piping, hoses, fittings, materials, shut‑off valves and installation practices to resist corrosion and mechanical damage.

Cylinder storage: Rules for cylinder lockers and cylinder housings (venting, labelling, accommodation of multiple supplies).

Ventilation, ducts and flues: Ventilation requirements and combustion air/discharge arrangements (see normative Annex B and clause on ducts/flues).

Electrical safety and ignition protection: Measures to prevent ignition from electrical devices in gas‑affected spaces (cross-referenced to IEC/ISO electrical protection standards).

Documentation and owner guidance: Required information to be included in the owner’s manual (Annex C) and instructions for portable cartridge appliances (Annex D).

Annexes: Design guidance for pressure drop (Annex A), normative ventilation and owner manual content, leak detection guidance.

Practical applications - who uses ISO 10239:2014

Marine designers and small craft manufacturers specifying safe LPG installations.

Marine electricians, gas installers and shipwrights installing or upgrading LPG systems.

Surveyors and safety inspectors assessing compliance for recreational vessels and workboats.

Equipment manufacturers (pressure regulators, hoses, lockers) developing marine LPG components.

Boat owners and operators seeking guidance on safe storage, labeling and routine leak checks.

Related standards

ISO 10239 references and complements other standards such as ISO 8846 (ignition protection), ISO 10240 (owner’s manual), EN 16129 (pressure regulators), and national/regional gas installation codes (e.g., EN 1949). Use these in combination for full compliance and commissioning practices.

Keywords: ISO 10239:2014, small craft LPG systems, liquefied petroleum gas, marine LPG installation, cylinder locker, pressure regulation device, LPG safety, vessel gas installation.

ISO 10239:2014

Abstract

Похожие стандарты

Overview

Key technical topics and requirements

Practical applications - who uses ISO 10239:2014

Related standards

Технические детали

BS EN ISO 10239:2025

Small craft. Liquefied petroleum gas (LPG) systems.

ISO 8846:2025

Small craft — Electrical devices — Protection against ignition of surrounding flammable gases

BS EN ISO 10240:2024+A11:2026

Small craft. Owner´s manual.