ISO 10893-1:2011

Overview

ISO 10893-1:2011 specifies requirements for automated electromagnetic non-destructive testing (NDT) of seamless and welded steel tubes (excluding submerged arc‑welded - SAW) to verify hydraulic leaktightness. The standard covers eddy current and magnetic flux leakage (MFL) inspection techniques, applicable to tubes (and hollow sections) with outside diameters ≥ 4 mm for eddy current and > 10 mm for flux leakage. It defines test techniques, equipment, reference tube calibration, acceptance criteria, and reporting requirements.

Key topics and technical requirements

• Test techniques covered
  • Eddy current: concentric coil, segment coil, fixed or rotating probe/pancake coil.
  • Magnetic flux leakage (MFL): fixed or rotating magnetic transducers, multiple concentric transducers.
• Dimensional and material limits
  • Eddy current applicable from OD ≥ 4 mm; MFL from OD > 10 mm.
  • Concentric coil eddy current limited to OD ≤ 250 mm (also applicable to square/rectangular tubes up to a 250 mm diagonal).
  • Segment coil limits: 2 × 180° coils up to Ø 219.1 mm; 4 × 100° coils up to Ø 508.0 mm.
  • MFL is not applicable to austenitic stainless steel tubes.
• Reference tubes and calibration
  • Defines use of reference standards (holes, longitudinal/transverse notches) and matching of reference tube diameter, thickness and surface condition to production tubes for equipment calibration.
• Equipment and operation
  • Automated classification (alarm/trigger), marking/sorting and coverage requirements (±10% speed variation limit).
  • Operators must be qualified per ISO 9712, ISO 11484 or equivalent; NDT authorization and level‑3 oversight are required.
• Ancillary requirements
  • Inspection timing (after primary production operations), surface cleanliness and straightness, calibration, acceptance, and test reporting procedures.

Practical applications and users

ISO 10893-1 is aimed at manufacturers, NDT service providers, quality engineers and procurement/supply chain professionals in industries using steel tubing (pressure tubing, mechanical, automotive, structural, and plant piping). Typical uses:

• Inline automated inspection during tube production to verify hydraulic leaktightness.
• Pre-shipment quality control to detect through‑wall leaks or major imperfections that compromise leak tightness.
• Calibration and validation of automated eddy current and MFL inspection lines.

Related standards

• ISO 10893 series (Parts 2–12) for other NDT methods on steel tubes (eddy current defect detection, full peripheral MFL, ultrasonic, radiographic, penetrant, magnetic particle, thickness testing).
• ISO 9712 - Qualification and certification of NDT personnel.
• ISO 11484 - Employer’s qualification system for NDT personnel.

Keywords: ISO 10893-1:2011, non-destructive testing, NDT, electromagnetic testing, eddy current, magnetic flux leakage, steel tubes, hydraulic leaktightness, reference tube, calibration, ISO 9712, ISO 11484.