ISO 13007-4:2013

Overview - ISO 13007-4:2013 (Test methods for grouts)

ISO 13007-4:2013 is the International Organization for Standardization (ISO) test-method specification for grouts used in ceramic tile installations. It defines standardized procedures to determine key performance characteristics of grout products - enabling consistent laboratory evaluation for product development, quality control and compliance. The standard sits within the ISO 13007 series for ceramic tile grouts and adhesives and focuses exclusively on test methods rather than product performance limits.

Key topics and technical requirements

The standard describes test methods and general test conditions, including sampling, mixing and reporting. Major test methods covered are:

• Flexural and compressive strength - preparation of prismatic specimens, jolting/compaction, test fixtures and calculation of mean strengths. (Specimen dimensions and loading rates are specified.)
• Water absorption - conditioning, sealing of prism sides, immersion procedure and mass-change calculations after 30 min and 240 min.
• Shrinkage - specimen preparation, dimensional measurement using dial gauges and reference rods, and conditioning.
• Resistance to abrasion - method for assessing wear resistance of grout surfaces.
• Transverse deformation - measurement procedures for deformation under specified conditions.
• Chemical resistance - exposure protocols and assessment of surface/structural changes.
• Durability conditioning - e.g., freeze–thaw cycling applied prior to strength tests (references procedures in ISO 13007-2).
• General conditions - standard lab environment (23 ± 2 °C, 50 ± 5 % RH), minimum sample quantity (at least 2 kg), mixing procedures for cementitious and resin grouts, and required test-report contents (date, grout type, water used, handling, results, etc.).

Practical applications and who uses it

ISO 13007-4 is used by:

• Manufacturers - to validate formulations, support technical data sheets and ensure batch-to-batch consistency.
• Third‑party testing laboratories - to provide certified test reports for compliance and product claims.
• Specifiers and architects - to compare grout performance for demanding applications (wet areas, chemical exposure, heavy wear).
• Contractors and installers - for product selection and quality assurance on-site.
• Procurement and regulatory bodies - to reference standardized test evidence in specifications and approvals.

Benefits include reproducible test results, improved product comparability and reduced risk in material selection for ceramic tile installations.

Related standards

• ISO 13007-1: Terms, definitions and specifications for adhesives
• ISO 13007-2: Test methods for adhesives (referenced for some conditioning procedures)
• ISO 13007-3: Terms, definitions and specifications for grouts
• ISO 10545-6: Resistance to deep abrasion for unglazed tiles (cited for abrasion methods)

Keywords: ISO 13007-4:2013, grouts test methods, ceramic tile grout testing, flexural strength, compressive strength, water absorption, grout shrinkage, abrasion resistance, chemical resistance.