ISO 14116:2015

Overview

ISO 14116:2015 - "Protective clothing - Protection against flame - Limited flame spread materials, material assemblies and clothing" specifies minimum performance, design and information requirements to reduce the risk that clothing will ignite or continue to burn after brief, occasional contact with small flames. The standard covers testing, classification and marking of materials, material assemblies and garments that exhibit limited flame spread, and gives practical rules for sampling, pre-treatment, ageing and conformity checks.

Key Topics and Requirements

• Limited flame spread performance: Classification into indices based on test results obtained using ISO 15025, Procedure A (flame test).
• Design requirements: Rules to minimise contact between index 1 materials and skin; garment overlap, placement of interlinings and hardware, and structural seam considerations.
• Mechanical requirements: Tensile strength, tear strength, burst strength and seam strength tests for materials and assemblies (referenced ISO textile test methods).
• Sampling, pre-treatment and ageing: Procedures for preparing specimens, cleaning indexes, conditioning and ageing (including limits for cleaning/washing cycles) before testing.
• Marking and manufacturer information: Requirements for labelling garments, material assemblies and single-layer materials with final index, cleaning index and user information.
• Testing of accessories and components: Procedures for labels, badges, retro-reflective materials and hardware to ensure they do not compromise limited flame spread performance.
• Classification & conformity: Rules to determine final index (Index 1, 2 or 3) and how to report uncertainty and property values for rating and classification.

Applications and Who Uses ISO 14116

ISO 14116 is used where garments must resist ignition and prevent propagation from brief, small-flame exposure. Typical users include:

• Protective clothing manufacturers and designers specifying materials and constructions with limited flame spread.
• PPE test laboratories performing ISO 15025 and associated mechanical tests.
• Procurement and safety managers selecting clothing for work where occasional small-flame contact can occur.
• Regulatory bodies and conformity assessors verifying labelling, marking and performance claims.

Note: ISO 14116 is not intended when protection against sustained heat or heat hazards is required - in those cases standards such as ISO 11612 should be used.

Related Standards

• ISO 15025 - Method of test for limited flame spread (referenced test procedure)
• ISO 11612 - Protective clothing - protection against heat and flame (for heat hazards)
• ISO 13688 - General requirements for protective clothing
• ISO/TR 2801 - Guidelines for selection, use, care and maintenance of protective clothing against flame

Keywords: ISO 14116, protective clothing, limited flame spread, ISO 15025, flame protection, material assemblies, classification, garment marking, mechanical requirements.