ISO 14243-1:2009

Name: ISO 14243-1:2009 — Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
SKU: ISO 14243-1:2009
Price: 25 EUR
Availability: InStock

Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

Название (английский):

ISO 14243-1:2009

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 10 ноября 2009 г.
Издание:: ISO IS 14243 edition 2 version 1
ICS:: 11.040.40

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 14243‑1:2009 specifies the flexion/extension relative angular movement between articulating components, the pattern of the applied force, speed and duration of testing, sample configuration and test environment to be used for the wear testing of total knee-joint prostheses in wear-testing machines with load control.

Abstract

Похожие стандарты

Упомянутые в описании и другие стандарты ISO

Overview

ISO 14243-1:2009 - Implants for surgery - Wear of total knee-joint prostheses - Part 1 describes the loading, displacement and environmental parameters for laboratory wear testing of total knee replacements using wear-testing machines with load control. The standard defines how to reproduce the flexion/extension motion, contact force patterns, speeds, durations, specimen configuration and fluid test environment to simulate in vivo walking conditions and obtain reproducible wear data.

Key topics and technical requirements

Scope: Specifies flexion/extension angular motion, axial force, anterior–posterior (AP) force, tibial rotation torque, speed and test duration for load-controlled wear tests.

Loading and motion control: Machines must operate at 1 Hz ± 0.1 Hz and generate the prescribed axial force and flexion/extension cycles within ±5% tolerance of specified maxima.

Force components: Includes axial force, AP force (cyclic + displacement-dependent component) and tibial rotation torque (cyclic + rotation-dependent component) to model ligament restraint.

Geometry & alignment: Defines reference position, flexion/extension axis and an axial force axis offset of 0.07 w ± 0.01 w (w = tibial component width) for consistent loading.

Specimens & sampling: Minimum of three test specimens plus two passive soak controls (or one loaded control). Components should be sterilized as for clinical use and mounted using fixation comparable to intended anatomical fixation.

Lubricant & environment: Fluid test medium is calf serum diluted to 20 g/l protein, typically filtered (2 μm), stored frozen and optionally treated with antimicrobial agents; test conditions simulate physiological environment and pH monitoring can be reported.

Apparatus & reporting: Requires enclosed, corrosion-resistant fixtures, reproducible alignment methods, and detailed test reporting (see Clause 8) including medium composition and test parameters.

Practical applications and users

ISO 14243-1:2009 is used by:

Medical device manufacturers for pre-clinical wear evaluation of total knee-joint prostheses.

Test laboratories and contract research organizations performing standardized wear testing under load-control conditions.

Regulatory reviewers and quality managers assessing wear data for device approval, design verification, or comparative performance studies.

R&D teams optimizing bearing materials, geometries and fixation to minimize wear and extend implant life.

Practical benefits include reproducible, comparable wear results across studies and better correlation of laboratory testing with expected in vivo loading patterns.

ISO 14243-1:2009

Abstract

Похожие стандарты

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Технические детали

BS ISO 14243-2:2016

Implants for surgery. Wear of total knee-joint prostheses. Methods of measurement.

ISO 14243-3:2014

Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for…

ISO 8212:1986

Soaps and detergents — Techniques of sampling during manufacture

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 3021:2023

Adventure tourism — Hiking and trekking activities — Requirements and recommendations

ISO 3826-2:2008

Plastics collapsible containers for human blood and blood components — Part 2: Graphical symbols for use on l…

ISO/IEC 24730-1:2014

Information technology — Real-time locating systems (RTLS) — Part 1: Application programming interface (API)

ISO 8668-5:1992

Aircraft — Terminal junction systems — Part 5: Detail specification for type 3 system