ISO 1442:2023

Overview

ISO 1442:2023 - "Meat and meat products - Determination of moisture content - Reference method" specifies two validated reference methods for determining moisture in meat and meat products: a direct drying method and a distillation method. The standard defines procedures, required reagents and apparatus, sample preparation, calculation and reporting rules, and precision data to support reliable laboratory moisture analysis.

Key topics and technical requirements

• Scope: Two reference approaches depending on sample volatility:
  • Direct drying method - for products with low volatile substances besides water.
  • Distillation method - for products containing significant volatile components (co‑distillation with toluene or xylene).
• Sampling & sample prep:
  • Recommended starting laboratory sample ≥ 200 g.
  • Homogenize (mincer or cutter); thaw frozen samples at 15–25 °C without exceeding 25 °C.
  • Store homogenized samples sealed and analyze promptly (refrigerate 4–7 °C if needed, within 24 h).
• Direct drying method requirements:
  • Mix 5–8 g test portion with clean, acid‑washed sand (3–4× mass).
  • Dry at (103 ± 2) °C (electrical oven); initial heating 2 h, then repeat heating/cooling/weighing until constant mass (two successive weighings, 1 h apart, ≤ 0.1 % of test portion).
  • Analytical balance to 0.001 g; desiccator and glass/porcelain/metal dishes required.
  • Report moisture as % m/m, rounded to one decimal place.
• Distillation method requirements:
  • Co‑distill water with toluene or xylene using a moisture analyser; calculate moisture from collected water volume.
  • Use reagents of analytical grade and water meeting ISO 3696.
• Performance:
  • The standard provides precision information (interlaboratory test results) and repeatability/reproducibility criteria (see Annex A).

Applications and users

ISO 1442:2023 is intended for:

• Food testing and analytical laboratories performing routine or reference moisture determinations.
• Meat processors and quality control teams monitoring product formulation, yield and shelf life.
• Regulatory authorities and specifiers verifying compliance with labeling or contract specifications.
• R&D and product development groups assessing water content effects on texture and safety.

Practical uses include product specification verification, process control, moisture-related yield calculations, and comparative testing across laboratories.

Related standards

• ISO 3696 - Water for analytical laboratory use (referenced for reagent water quality).
• CAC/GL 50-2004 - Recommended sampling guidance for food laboratory samples.

Keywords: ISO 1442:2023, moisture content, meat and meat products, reference method, direct drying, distillation, toluene, xylene, laboratory analysis, repeatability, reproducibility.