ISO 14624-6:2006

Overview

ISO 14624-6:2006 - Space systems: Safety and compatibility of materials - Part 6 specifies laboratory tests and procedures to determine the reactivity of processing materials with aerospace fluids. It is intended to identify chemical interactions, degradation, or exothermic reactions that can occur when materials used in ground support, processing, or fabrication are exposed - intentionally or accidentally (e.g., splash or spill) - to cleaning agents, lubricants, solvents and other aerospace fluids.

Key topics and technical requirements

• Scope and purpose: Screening and evaluation of material reactivity and suitability after exposure to aerospace fluids; focuses on small-quantity exposures typical of ground support operations.
• Safety precautions: Tests must be performed in appropriate laboratory hoods; personnel must wear fluid-compatible gloves, laboratory aprons and face shields or goggles.
• Sample preparation:
  • Test samples are evaluated in their intended use form and thickness.
  • Cleaning procedures use deionized water, mild detergent and filtered gaseous nitrogen for nonporous samples; particulates for porous samples are removed with filtered nitrogen per ISO 14951-3.
  • Typical specimen sizes include 100 mm square samples and 100 mm × 150 mm specimens for mechanical property tests. Liquids are typically applied as 1 ml in a small beaker.
• Test methods:
  • Reactivity test: Monitored with a thermocouple in contact with the specimen; look for exotherms, burning, bubbling, charring, swelling, solubility or fracture. Maintain a liquid film for the specified exposure time (determined by expected use-time).
  • Penetration test: Detects fluid penetration through films, fabrics or protective garments by observing first droplet or wetness beneath the specimen.
  • Mechanical evaluation: Assesses changes in mechanical properties after exposure; conducted only after passing initial reactivity screening.
• Reporting requirements: Test reports must include material ID (manufacturer, trade name, composition), test conditions (temperature, duration, thickness), observed reactivity or penetration, post‑exposure physical changes, and test conclusions.

Applications and users

ISO 14624-6 is used by:

• Materials engineers and chemists evaluating compatibility of polymers, adhesives, tapes, greases, coatings and fabrics with aerospace fluids
• Test laboratories conducting safety screening for ground support equipment and processing materials
• Spacecraft manufacturers, ground support planners and safety officers responsible for spill response and material selection Practical applications include validating materials for cleaning, assembly, handling and protective garments where accidental fluid contact is a risk.

Related standards

• ISO 14624 (Parts 1–7) – broader series on flammability, offgassing, propellant reactivity, permeability, etc.
• ISO 14951-3 – fluid characteristics: nitrogen (referenced for filtered gaseous nitrogen)
• ISO 4599, ISO 4954 – referenced for complementary material and test procedure requirements

Keywords: ISO 14624-6, aerospace fluids, material reactivity testing, space systems, ground support materials, laboratory safety, penetration test, reactivity test.