ISO 15734:2001

Overview

ISO 15734:2001 specifies performance and testing requirements for hydrostatic release units (HRUs) used with float‑free lifesaving appliances such as inflatable liferafts and EPIRBs. HRUs that comply with this standard and are formally approved by the relevant Maritime Safety Administration may be considered to meet the requirements of SOLAS 1974 and the IMO Life‑Saving Appliances (LSA) Code. The standard covers construction, marking, servicing, prototype and production testing, installation inspection and weak‑link requirements.

Key topics and technical requirements

• Scope: Performance and testing for HRUs for liferafts and Emergency Position Indicating Radio Beacons (EPIRBs).
• Construction & materials:
  • Corrosion‑resistant materials compatible with seawater, oil and detergents.
  • Drains to prevent water accumulation in the hydrostatic chamber.
  • Operability over air temperature −30 °C to +65 °C and seawater −1 °C to +30 °C.
  • Automatic release at a depth of not more than 4 m; no premature release from surface wash‑over.
• Markings & documentation:
  • Permanent marking of manufacturer, type, serial number, manufacture date and capacity limits; expiry marking for disposable types.
  • Operating and maintenance instructions and a servicing record plate for annual service units.
• Weak link:
  • Materials resistant to corrosion; cordage ends whipped/heat treated or wire ends secured with thimbles and ferrules.
  • Tensile‑break strength between 1.8 kN and 2.6 kN.
• Prototype tests (sequence includes):
  • Corrosion resistance: salt spray per ISO 9227 (5% NaCl, +35 °C for 160 h).
  • Temperature cycling: alternating half‑cycles at −30 °C and +65 °C.
  • Submergence & manual release: release between 1.5 m and 4 m depth; inspection for degradation.
  • Strength test: tensile load (minimum 10 kN for 30 min, increased to 15 kN for liferafts approved for >25 persons).
  • Membrane tests: cold flexing and heat exposure; resistance to oil, seawater and detergents.
• Production tests:
  • Visual/dimensional sampling and submergence tests for reusable and disposable units; sample rejection criteria apply.
  • Weak‑link lot testing: minimum five samples; all must break within the specified 1.8–2.6 kN range.
• Installation:
  • Must be removable for servicing, not permanently secured; allow release without tools; weak link must not become part of painter until raft floats free.

Applications and who uses ISO 15734:2001

• Manufacturers of HRUs, liferafts and EPIRBs use the standard to design, test and certify equipment.
• Shipowners and operators reference it when procuring lifesaving appliances to ensure SOLAS/IMO compliance.
• Classification societies, flag state authorities and maritime inspectors use it for type approval and installation checks.
• Marine equipment suppliers, shipyards and third‑party test labs rely on the specified prototype and production test methods.
• Practical uses: product development, conformity assessment, routine production quality control, installation guidance, and maintenance/servicing protocols.

Related standards

• ISO 9227 (salt spray corrosion testing)
• SOLAS 1974 and IMO Life‑Saving Appliances (LSA) Code (for regulatory compliance)

Keywords: ISO 15734:2001, hydrostatic release units, liferaft HRU, EPIRB, SOLAS compliance, IMO LSA Code, marine safety testing, corrosion resistance, submergence test, weak link strength.