ISO 16474-2:2013

Overview

ISO 16474-2:2013 - Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon‑arc lamps specifies controlled laboratory procedures for reproducing weathering effects caused by daylight (or daylight filtered through glass) on coatings and related materials. The standard defines how to expose test specimens to filtered xenon‑arc radiation in the presence of moisture and to control environmental parameters (temperature, humidity and/or wetting) to generate reproducible accelerated weathering results.

Keywords: ISO 16474-2:2013, xenon-arc lamps, paints and varnishes, accelerated weathering, laboratory exposure, coating durability.

Key Topics

• Test principle: Use of quartz‑jacketed xenon‑arc lamps with selectable filters to simulate daylight spectral power distribution (UV → visible → IR).
• Filtering options: Methods for daylight simulation (daylight filters - Method A) and for daylight transmitted through window glass (window‑glass filters - Method B), with defined spectral irradiance limits.
• Environmental control: Specification of controlled conditions including irradiance (radiant exposure), black‑standard/black‑panel temperature, air temperature, relative humidity and wetting cycles (spray, immersion or condensation).
• Apparatus & measurement:
  • Radiometer and spectral measurement requirements to confirm irradiance and radiant exposure in the specimen plane.
  • Test chamber design, specimen holders and wetting/humidity equipment.
  • Instruments for assessing changes in properties after exposure.
• Procedure elements:
  • Mounting and exposure of specimens, monitoring of exposure duration, recording of radiant exposure and test reporting requirements.
  • Guidance on selecting filter combinations, irradiance levels and light/dark cycles to match specific material needs.
• Quality and comparability: Recommendation to include control materials and warning against direct intercomparison between different apparatus unless statistically correlated.

Applications

ISO 16474-2:2013 is used to evaluate the weathering resistance and durability of paints, varnishes, coatings and similar materials under simulated daylight conditions. Typical users:

• Coating manufacturers and formulators assessing UV stability and colourfastness.
• Test laboratories performing accelerated weathering and comparative performance testing.
• R&D teams developing new coatings, additives and protective films.
• Quality assurance departments validating product lifetime and claims.

Practical benefits include faster feedback than outdoor exposure, repeatable test protocols, and the ability to tailor spectral and environmental conditions to specific end‑use scenarios (e.g., exterior exposure vs. exposure behind glazing).

Related Standards

• ISO 16474-1 - General guidance for laboratory light source exposure methods.
• ISO 4892-2 - Xenon‑arc exposures for plastics.
• ISO 4618 - Terms and definitions for paints and varnishes.
• ISO 9370 - Radiant exposure measurement guidance.

Using ISO 16474-2:2013 supports standardized, reproducible accelerated weathering testing and helps correlate laboratory results with real-world coating performance.