ISO 16589-3:2011

Name: ISO 16589-3:2011 — Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation
SKU: ISO 16589-3:2011
Price: 25 EUR
Availability: InStock

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation

Название (английский):

ISO 16589-3:2011

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 3: Storage, handling and installation

Статус документа:: Действующий
Формат:: Электронный (PDF)
Количество страниц:: 14
Дата публикации:: 7 апреля 2011 г.
Издание:: ISO IS 16589 edition 2 version 1
ICS:: 23.100.60

Тип поставки:

Full version25 €Ask AI2 €Read online 24h10 €Read online 72h15 €

Язык документа:

ruen

Срок поставки:1 рабочий день

Цена:25 €

Описание (английский):

ISO 16589 specifies seals utilizing sealing elements manufactured from suitably formulated compounds, based on thermoplastic materials, such as polytetrafluoroethylene (PTFE). They are considered suitable for use under low-pressure conditions. ISO 16589-3:2011 gives users of lip-type seals guidance on the careful storage and handling and proper installation of rotary shaft lip-type seals; attention is drawn to the hazards involved and ways of avoiding them are pointed out.

Abstract

Похожие стандарты

Стандарты, упомянутые в описании

Overview

ISO 16589-3:2011 provides practical guidance for the storage, handling and installation of rotary shaft lip-type seals incorporating thermoplastic sealing elements (for example PTFE-based seals). Part 3 of ISO 16589 focuses on avoiding damage and hazards that shorten seal life or compromise equipment (bearings, housings, shafts) and complements dimensional and vocabulary parts of ISO 16589.

Key topics and requirements

Storage practices

Store seals per ISO 2230 and protect from dust, grit, insects, rodents, radioactive materials and harmful fumes.
Keep seals in a dedicated, non-work area or closed containers to prevent mechanical damage and contamination.
Avoid excessive stacking weight that could deform packaged seals.

Packaging and unpacking

Protect seals during transport and storage; do not remove from packaging until ready for installation.
Unpack carefully to avoid cuts or nicks from knives or tools.

Handling loose parts

Do not hang seals on nails or thread them on wires; avoid contact between metal edges and sealing elements.
Keep seal surfaces free of abrasives; use manufacturer-recommended cleaners and avoid abrasive or incompatible solvents.

Installation

Inspect seals before fitting; seals can often be installed unlubricated unless supplier specifies lubricant type/amount.
Provide lead-in chamfers on shafts and housing bores as specified in ISO 16589-1.
Use proper installation tools (bullet‑nosed or special tools) to avoid lip damage and ensure squareness with the bore or shoulder.
When press-fitting components over the running area, reduce shaft diameter in the running area by 0.2 mm to avoid damaging the lip.
For low-temperature assembly, restore lip flexibility by immersing seals 10–15 minutes in a compatible fluid not exceeding 50 °C.

Replacement guidance

Always fit new seals when replacing; shift the new seal lip to the fluid side so it does not engage the previous wear track.

Practical applications

Ensures long service life of rotary seals used in low-pressure rotating applications: hydraulic/pneumatic machinery, pumps, motors, gearboxes and other OEM equipment where PTFE/thermoplastic lip seals are used.

Useful for maintenance teams, assembly technicians, quality engineers and procurement to reduce leakage risk and costly secondary damage (bearings, shafts).

ISO 16589-3:2011

Abstract

Похожие стандарты

Overview

Key topics and requirements

Practical applications

Who should use this standard

Related standards

Технические детали

BS ISO 16589-2:2011

Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Vocabulary.

ISO 22303:2008

Tobacco — Determination of tobacco specific nitrosamines — Method using buffer extraction

ISO 16589-1:2011

Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 1: Nominal dimensions and tol…

BS ISO 16589-4:2011

Rotary shaft lip-type seals incorporating thermoplastic sealing elements. Performance test procedures.

ISO 6194-2:2009

Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 2: Vocabulary