ISO 17197:2014

Overview

ISO 17197:2014 - Dimethyl ether (DME) for fuels - Determination of water content - Karl Fischer titration method specifies a test procedure for measuring water content in DME used as a fuel using Karl Fischer titration (coulometric or volumetric). The method is applicable across a wide range of concentrations (from mg/kg (ppm) up to percent levels) and is intended for DME and related petroleum products and additives. The standard is aligned to the water limits referenced in ISO 16861 and is intended for routine laboratory quality control and conformance testing.

Key Topics and Requirements

• Scope and principle
  • Measures water in gaseous or liquid DME by bubbling the sample into a Karl Fischer titration vessel; water is quantified by the stoichiometry of the Karl Fischer reaction.
• Reagents and materials
  • Use anhydrous methanol (≥99.9 %), commercially available coulometric or volumetric Karl Fischer reagents (pyridine-free volumetric options), and molecular sieves or drying agents.
• Apparatus
  • Coulometric or volumetric Karl Fischer titrator with electrometric end-point detection, pressure gas cylinder with double-valve for sample introduction, stainless steel needle for bubbling, and an electronic balance (accuracy ≥1 mg).
• Sampling and sample handling
  • Follow ISO 29945 for manual sampling of refrigerated liquefied gaseous fuels; recommended laboratory specimen size typically 10–20 g.
• Calibration and standardization
  • Standardize KF reagents at least daily; calculate water equivalence (mg/ml) and ensure duplicate standardizations agree within 2% relative.
• Procedure controls
  • Maintain sealed system to prevent atmospheric moisture ingress, stable background current/titration rate before measurement, and gas flow control (approx. 0.5–2.0 g/min).
• Precision
  • Precision data are limited: interlaboratory study coverage is restricted, so ISO 17197 supports quality specification establishment but does not claim full precision equivalence with ISO 4259 statistical methodology.
• Safety
  • The method involves hazardous materials and pressurized cylinders; follow laboratory safety and regulatory requirements.

Applications and Users

• Practical uses:
  • Quality control of DME fuel shipments and storage
  • Acceptance testing at terminals and during transport
  • Testing water in DME additives, lube oils, base oils, automatic transmission fluids, hydrocarbon solvents, and other petroleum products
• Typical users:
  • Fuel producers and distributors, testing and calibration laboratories, terminal operators, regulatory bodies, and R&D teams working with alternative gaseous fuels and DME formulations.

Related Standards

• ISO 16861 - Specification limits for DME fuels (referenced water value)
• ISO 760 - General Karl Fischer method guidance
• ISO 29945 - Manual sampling of refrigerated DME
• ISO 5725-2 - Precision (repeatability & reproducibility) methodology
• ISO 4259 - Precision-statistics guidance (note: ISO 17197 precision is limited compared to ISO 4259)

Keywords: ISO 17197, DME water content, Karl Fischer titration, dimethyl ether fuel testing, coulometric Karl Fischer, volumetric Karl Fischer, water in fuels, fuel quality control.